OPERATING INSTRUCTIONS
Warning: For proper lifting procedure, follow instructions in Patient Lift Owner's Manual while operating scale.
Warning: Do not use patient lift / scale system to transport patient.
1.Press the ZERO button to set the scale system to Zero. “0” will pan across the screen for several seconds; display will then read “0.0”.
2.Press the Kg/Lb button to choose the display mode (Kilograms or Pounds).
3.Remove the sling/stretcher from the swivel bar.
4.Position the patient.
5.
6.Carefully lift the patient.
7.When motion has stabilized, press the OPERATE button to display the weight data. Do not touch the patient or sling/stretcher during this step.
Note: The scale system automatically goes to sleep after 60 seconds to conserve the battery. To wake the system, press the OPERATE button.
8. When the weighing process is complete, lower the patient carefully.
display
Zero button
Operate button
Kg/Lb button
patient lift scale
operation buttons
9. Press the ZERO button to
Battery Replacement
The Lift Scale is powered by one
1.Open access door on back of scale.
2.Remove old battery from terminals.
3.Install new battery on terminals.
4.Close access door. Ensure that access door is securely closed before using scale.
Note: The battery load cell contains no
battery access door
WARRANTY
One year limited warranty. For additional warranty information, please contact your Lumex dealer.
Atlanta, Georgia 30360
printed in U.S.A.
|
|
2 | LF1007 / LF1009A: Lift Scale Kit Operation Instructions |
| |
|