ELECTRICAL SAFETY
3.Grounded products must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If a grounded prouct should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.
4.Double insulated products are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug in any way.
Double insulationeliminates the need for the three wire grounded power cord and grounded power supply system.
5.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.
6.Do not expose the Scale to rain or wet conditions. Water entering the Scale will increase the risk of electric shock.
7.Do not abuse the Power Cord. Never use the Power Cord to carry the Scale or to pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.
8.When operating the Scale outside, use an outdoor extension cord marked
shock.
PERSONAL SAFETY
9.Stay alert. Watch what you are doing, and use common sense when operating the Scale. Do not operate the Scale while tired or under the influence of drugs, alcohol, or medication.
10.Store the Scale out of reach of children and other untrained persons. Electrical products are dangerous in the hands of untrained users.
USE AND CARE
11.Do not use the Scale if the Power Switch does not turn it on or off. Any appliance that cannot be controlled with the Power Switch is dangerous and must be replaced.
12.Disconnect the Power Cord before making any adjustments, changing the battery, or storing the Scale. Such preventive safety measures reduce the risk of turning on
the product accidentally.
SERVICE
13.Scale service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
SKU 95069 | For technical questions please call | Page 3 |