Bifinett KH 1155_UK.qxd 11.12.2003 14:17 Uhr Seite 4
Adding & Weighing (Tare Function)
You can set the scale to 0 in order to weigh additional partial quantities.
➩ To do this, press the Z/T button | once. |
The scale once again shows 0 grams and TARE appears in the display .
➩Add the material to be weighed to the bowl.
The weight of the added material is shown in the display.
iYou can repeat this step multiple times.
However, never place more than 5 kg on the scale.
Removing Materials
➩ Press the Z/T button once.
The scale once again shows 0 grams and TARE appears in the display .
➩ Remove the desired quantity of material.
The weight value of the removed material appears in the display as a negative value.
i You can repeat this step multiple times.
Setting the Timer |
|
➩ Press the clock button once. |
|
The bell symbol appears in the display | next to the clock. |
➩ Set the desired time with the Z/T | and KG/LB buttons. |
You can set the time in 10 second steps.
➩ Press the clock button | to start the timer. |
You can stop the timer. |
|
➩ Press the clock button | once. |
You can reset the timer. |
|
➩ Press the clock button | twice. |
When the configured time has elapsed, a signal tone sounds for 60 seconds. This tone can be shut off by pressing the on/off button .
Temperature Display
When the scale is switched on, the display shows the tem- perature in °C in the upper right.
Switching Off the Scale
If you do not weigh anything for 90 seconds, the automatic cut- out switches off the scale.
➩ To switch it off manually, press the on/off button .
4