Cleaning/Replacing Jet Parts
Tools needed: Needle nose pliers, 7/8” deep well socket with extension.
European TouchTM recommends that the jet assemblies are cleaned periodically. European TouchTM Sanitizing Spray is the recommended cleaning agent. Follow these steps to clean your jet parts or to replace any of the pieces:
Remove the jet eyeball using the needle nose pliers.
Remove the adjusting cover. This should pull out.
Remove the jet nozzle and nut using a 7/8” deepwell socket and extension.
Clean the individual parts and re-
4 assemble the jet assembly. The jet nozzle nut should be hand tightened. If the adjustment cover is hard to turn, slightly loosen the jet nozzle nut.
petitetm portable whirlpool pedicure spa owners manual