John Mills John Mills Titanium Hair Straightener manual Mains plug wiring, Mains Fuse

Page 11

is not suitable for your mains socket, then follow carefully the wiring instructions below.

If the plug is cut off, remove the fuse from the severed plug and dispose of it safely, as insertion into a mains supply socket would be dangerous.

Mains plug wiring

As the colour of the wires in the mains lead may not correspond with the coloured markings identifying terminals in your plug, proceed as follows:

The wire that is coloured BROWN or RED is connected to the terminal that is marked with the letter “L”.

The wire that is coloured BLUE or BLACK is connected to the terminal that is marked with the letter “N”.

No connection is made to the earth terminal which

is marked “E” or or coloured GREEN or GREEN and YELLOW.

Mains Fuse

If a 13Amp (BS 1363 type) plug is used then a 13 Amp (BS 1362 type) fuse must be fitted.

Due to continual improvements, the appearance or specification of this product may change slightly to that shown.

Titianium Hair Straighteners - 11

Image 11
Contents TitaniumHairStraighteners Titanium Ionic Straighteners Instructions Important Safety NoteAlways read the instructions prior to first use General Safety InstructionsTitianium Hair Straighteners Titianium Hair Straighteners Allow AT Least 30 Minutes to Cool Down Before Storing Away Extra Safety PrecautionsControls and Features Benefits Instructions for Use Disposal and the Environment Cleaning and MaintenanceConnection to Power Mains Fuse Mains plug wiringNW5 3EG