OPERATION __________________________________________________________
Settings
Your appliance has the following settings:
Temperature level/blower level C
–0: Off
–1: Gentle air flow and moderate temperature for gently drying and styling
–2: Strong air current, high temperature for quick drying
Cool shot F
–❄: Interrupts heating and provides a cool air flow
Changing the styling attachments
1 Detach the attached styling attachment A by pressing on the catch (on the back of the appli- ance) B and turning the hot air brush slightly to the right.
2Place another styling attachment on so that the recess and the catch B (on the back of the appliance) are in line and turn slightly to the left until it clicks.
Operation
Check if the mains voltage on the type plate (on the handle of the device) corresponds to your local mains supply.
1Thoroughly towel dry your hair after washing.
2Plug the D power cord into the wall socket.
3Turn on the appliance with the switch C and set the required temperature level/blower level.
4If necessary, interrupt heating by pressing and holding down the G button (Cool Shot).
Note
7Cool Shot interrupts heating and provides a cool air flow. This allows you to fix your hair- style better and more lastingly.
5 After use, switch off the appliance with the C switch and pull the plug of the mains
cable D out of the socket.
Note
7Never wind the mains cable around the appli- ance, because this can cause damage.
Please check the appliance and the cable regu- larly for visible damage.
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing. Remember to clean the air inlet grille G occa- sionally with a soft brush to remove hairs and dust.