Instructions

04CN1149 CS13CSC_IB 2/3/05 4:15 PM Page 1

IMPORTANT SAFETY

When using electrical appliances, especially when children are present, basic safety pre- cautions should always be followed, includ- ing the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER — Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

1.Always “unplug it” immediately after using.

2.Do not use while bathing or in a shower.

3.Do not place or store appliance where it can fall or be pulled into a tub or sink.

4.Do not place in, or drop into water or other liquid.

5.If an appliance falls into water, “unplug it” immediately. Do not reach into the water.

WARNING — To reduce the risk of burns, electrocution, fire, or injury to persons:

1.This appliance should never be left unattended when plugged in.

2.This appliance should not be used by, on, or near children or individuals with certain disabilities.

3.Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

4.Do not use an extension cord to operate appliance.

5.Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service centre for examination and repair.

6.Keep the cord away from heated surfaces.

7.Do not pull, twist, or wrap line cord around appliance, even during storage.

8.Never place the appliance on a soft sur- face, such as a bed or couch, where the air openings may be blocked.

9.Never use while sleeping.

10.Never drop or insert any object into any opening or hose.

11.Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.

12.This styling iron is hot when in use. Do not let eyes or bare skin touch heated surfaces.

13.Do not place the heated iron directly on any surface or on the appliance power cord while it is hot or plugged in.

14.Before plugging unit in, read the infor- mation about dual voltage contained in the instruction section of this manual.

15.Do not attempt to touch appliance housing near the straightening plate. It is hot when in use.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This multiplate straightening iron is intended for household use. This unit is designed to operate at 125/250 volts AC. Use on Alternating Current (50/60 hertz) only.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

DUAL VOLTAGE

This straightening iron will automatically adjust to the proper voltage. Use an adapter plug with correct configuration, prior to use in outlet.

GETTING STARTED

The straightening iron’s 25 temperature settings and Instant Heat 60 second heat-up technology combine to provide styling versatility for all hair textures. If you have fine hair, a low temperature will provide the best results. If you have thick, wavy or hard-to-straighten hair, keep the heat setting high. You can vary the iron’s temperature according to your particular need!

STRAIGHTENING BASICS

1.Plug the straightening iron cord into any household outlet (120/240V). Press “ON” button. The iron will heat up very quickly. The indicator light will stop blinking and remain on when the iron is ready to use. To turn off, press “OFF” button (light will go off). Never leave your straightening iron on and unattended.

WARNING: The straightening iron's ceramic- coated plates will get very hot within a few seconds and should not be placed in contact with the skin after the iron has been turned on.

Hair should be clean and completely dried before using any straightening iron.

Start with a hair section that is 1" wide and no more than 1/8" thick. Open the straight- ener and place a hair section between the two hot plates, close to the scalp. Trap hair between the plates by firmly squeezing the handles together. While maintaining the tension, slowly pull the unit down along the hair section toward the end of hair. For best results, use a light styling lotion before blow-drying hair. At the end of hair section, release the pressure on the handle and allow the hair section to slide out. Repeat process on additional sections of hair until you achieve the hair style you desire. It may be necessary to repeat process on certain areas, depending on the texture of your hair.

Some experience is necessary when learning to use this straightening iron. After using iron several times, you will learn the ideal

temperature and method to straighten and style your hair easily.

STYLING WITH THE NEW SATIN FINISH EASY-GLIDE CERAMIC-COATED PLATES

The plates of your new multiplate straightener have a Satin Finish Easy-Glide ceramic-coat- ed surface, the newest technology in profes- sional hair care.

This means it’s not only simpler to clean off styling product residue after each use, but you’ll also find that hair glides easily over the surface of the plates as you’re straightening.The ceramic-coated surface also helps smooth down flyaways and frizzies. As you smooth each strand, heat is evenly distributed so that the style you create has a salon-perfect, silky smooth, shining finish. Hair slips right off the plates after it’s straightened.

The new ceramic technology is a pleasure to work with because it makes styling your hair easier and the results more professional.

The top plate features a flocked exterior that protects the scalp from the heat of the plates and promotes smooth, shiny hair.

2 Different Plates in One

3⁄4" for shorter hair, bangs and short layers

11⁄2" for long layers and long hair

CHANGING PLATES

1.Conair recommends the straightener be unplugged and allowed to cool before changing plates

2.Carefully remove the plates by holding the ribbed sections and pulling slightly.

3.Take the new plate to be attached and

guide it onto the unit by holding the ribbed section and pressing down to secure.

4.Unplug the straightener and allow the plates to cool prior to storing.

USING INSTANT HEAT, THE 25 VARIABLE TEMPERATURE SETTINGS & UNIFORM HEAT RECOVERY SYSTEM

This multiplate straightening iron features Conair’s Instant Heat technology. It heats up to the temperature you’ve selected for your hair type in just 60 seconds and is then ready to use.

This Instant Heat technology includes 25 variable temperature settings for every type of hair, from the finest to the curliest and most resistant. Select the temperature range that’s suitable for your hair type to help you create the look you want.

Temperature Setting Guide

Temp. Setting	Hair Type
Low 1-8	Delicate, thin, easy-to-straighten hair
Medium 9-14	Average to thick or treated hair
Med-High 15-20	Thick or wavy hair
High 21-25	Hard-to-straighten hair

And that’s not all. Conair’s professional salon standards of engineering provide you with a Uniform Heat Recovery System that maintains the straightening iron at a constant temperature.

There is a constant surge of power to ensure that heat is continuously delivered for optimal styling results, unlike other units which lose heat during use. This provides consistent styling power so that every strand of your hair is set with the same level of heat for a uniformly perfect finish.