Using your 1800W Hairdryer with Diffuser

Your 1800W Hairdryer with Diffuser has 2 heat and 2 speed settings. This combination allows for greater versatility and control when drying and styling your hair.

The switch marked with red numbers controls the temperature of the airflow as follows:-

I = Low heat

II = Medium/High heat

The switch marked with blue numbers controls the strength of the airflow as follows:-

0 = Off

I = Gentle airflow II = Strong airflow

A combination of high temperature and strong airflow is ideal for fast drying. Lower temperature and gentle airflow settings give greater control when styling.

The cool shot button provides a burst of cool air to set the style in place once styled.

To dry hair

•After shampooing and conditioning the hair, squeeze excess moisture from your hair using a dry towel.

•Comb hair free of all tangles with a wide tooth comb.

•Plug your dryer into a power outlet and turn the power on.

•Select the desired heat and speed combination and using your fingers dry hair from the roots to the ends.

•Use the concentrator nozzle onto specific areas of hair for spot drying or styling

•To use the diffuser, remove the concentrator nozzle and simply push on to the barrel of the dryer.

•The diffuser is ideal to use on naturally curly, wavy or permed hair.

•Always hold the dryer at least 30 cm away from the hair when drying.

Warning: The diffuser may become hot after extended use. Allow to cool before removing from the dryer or storing.

Please refer to the enclosed Guide to Styling for a step by step guide on how to achieve a range of looks.

Help Line

If you have any additional questions about using the 1800W Hairdryer with Diffuser,

please call the Sunbeam help line in Australia on 1 800 025 059. In New Zealand please call 09 912 0747.