English
Warning symbols
The following symbols are used in this manual:
Do not use this appliance near bathtubs,
showers, basins or other vessels containing water. When the hairdryer is
used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the
hair dryer is switched off.
! Denotes risk of personal injury or damage to the product in case of nonobservance of the instructions in this manual.
Denotes risk of electric shock.
Electrical safety
This tool is double insulated in accordance with EN 60335; therefore no earth wire is required. Always check that the power
supply corresponds to the voltage on the rating plate.
To avoid the risk of electric shock, do not immerse the cord, plug or motor unit in water or other liquid.
For additional protection, the installation of a Residual Current Device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
Features
1.Cool shot button
2.Ion indicator
3.Heat control switch
4.Speed control switch
5.Hanging loop
6.Concentrator nozzle
7.Diffuser nozzle
8.Rear cover
Assembly
Warning! Make sure that the appliance is switched off and unplugged. Fitting and removing the attachments (fig. A)
•Allow the appliance to cool before changing the attachments.
•Fit the diffuser nozzle (7) or the concentrator nozzle (6) by pushing it onto the outlet sleeve until it snaps into place. Removed the item by pulling it from the appliance.
Use
Warning! The appliance may be hot during use and during the
Switching on and off (fig. B)
The speed control switch (4) has three positions: off, slow and fast.
•Move the switch to position 0 to switch the appliance off.
•Turn the switch to position 1 for blowing air at a slow speed.
•Turn the switch to position 2 for blowing air at a high speed.
Heat control (fig. B)
The heat control switch (3) has three positions: warm, hot and very hot.
•Move the switch to position 1 for normal warm air.
•Move the switch to position 2 for hot air.
•Move the switch to position 3 for very hot air.
Cool shot button (fig. B)
•Press and hold the cool shot button (1) to set your individual style.
Diffuser and concentrator nozzles
•Fit the concentrator nozzle (6) for general hair drying and styling.
•To add volume and lift, fit the diffuser nozzle (7).
Ion indicator
•The ion indicator (2) will be permanently lit during use.
•The hair dryer will emit ions which will be carried onto the hair by the flow of air.
Note: Smaller water particles dry faster, therefore reducing the time the hair is subjected to heat which can damage hair over time.
Cleaning and maintenance
Warning! Switch the appliance off and unplug it before cleaning or maintenance.
•Remove any loose hair which may have become trapped in the diffuser or the rear filter.
•Open the rear cover (8) and remove hair.
•Do not try to disassemble or repair the hair dryer yourself.
•Switch off the appliance before cleaning, changing accessories or touching any parts which move in use.
Technical data
|
|
| PX80 |
| Voltage | Vdc | 230 |
Power input | W | 2000 | |
Weight | kg | 0.8 | |