Black & Decker PX1200 manual Assembly Fitting and removing the attachments Fig. a

English

Assembly

Warning! Make sure that the appliance is switched off and unplugged.

Fitting and removing the attachments (Fig. A)

•Allow the appliance to cool before changing the attachments.

•Fit the concentrator nozzle (4) by pushing it onto the outlet sleeve until it snaps into place. Removed the item by pulling it from the appliance.

•Switch off the appliance before cleaning, changing accessories or touching any parts which move in use.

•Always clean the appliance immediately after use.

•Clean the appliance with a damp cloth.

Warning! Do not immerse the appliance, the cord set or the plug in water or any other liquid.

Warning! Do not wash any parts in a dishwasher.

Use

Warning! The appliance may be hot during use and during the cool-down period.

Selecting the correct voltage setting (Fig. B)

•Before plugging the unit into a power supply socket, ensure the voltage selector (2) is set to the correct voltage for the location - either 120V or 230V.

Switching on and off (Fig. C)

Technical Data

		PX1200
Voltage	V	110-120/220-240
Power Input	W	1000-1200
Weight	g	300

•The speed control switch has three positions: off, slow and fast.

•Move the switch to position 0 to switch the appliance off.

•Turn the switch to position 1 for blowing air at a slow speed.

•Turn the switch to position 2 for blowing air at a high speed.

Cleaning and maintenance
Warning! Switch the appliance off and
unplug it before cleaning or maintenance.
• Do not try to disassemble or repair the
hair dryer yourself.	-5-