Panasonic MC-V414 00 Replacement Instructions, Lower Plate, Belt Replacement, Removal

Page 10

MC-V414 00

3 REPLACEMENT INSTRUCTIONS

3.1.

Lower Plate

3.3.

Agitator Assembly

3.1.1.

Removal

3.3.1.

Removal

1.Place handle in low position.

2.Turn the vacuum cleaner over exposing the underside. Release the lower plate by pressing the two (2) latches that secure it inward.

3.Separate the lower plate from the vacuum.

1.The brushes are not replaceable separately. When the brushes need replacing, the agitator assembly will have to be replaced.

2.Carefully lift up on the agitator assembly until it clear both sides of the nozzle housing.

3.1.2.Installation

1.Close the rear belt cover.

3.Hook the front of the lower plate into the slots on the front of the nozzle housing. Press the lower plate down into place.

4.Fasten the lower plate by pushing the two (2) latches out- ward.

5.NOTE: For general servicing, it is necessary to eliminate pinching of any wire during reassembly. After servicing any electrical component or enclosure, the unit should be reassembled and checked for dielectric breakdown or current leakage.

3.2.Belt Replacement

3.2.1.Removal

1.Follow the removal instructions outlined in the AGITATOR ASSEMBLY REMOVAL/INSTALLATION section.

3.2.2.Installation

1.Place the new belt around the motor shaft and follow the installation instructions in the AGITATOR ASSEMBLY REMOVAL/INSTALLTION section.

3.Remove the belt from the motor shaft by sliding it off between the end of the shaft and the nozzle housing.

3.3.2.Installation

1. Place the belt around the motor shaft.

2.Place the belt around the agitator pulley on the agitator assembly.

3.Reassemble the new agitator assembly back into the noz- zle housing by placing the side opposite the belt partially into the slot. The small tabs should be aligned with the nozzle. This will hold the agitator in place and leave both hands free to place enough tension on the belt to allow that side of the agitator to return to the nozzle housing slot.

4.Rotate the agitator assembly by hand to insure nothing rubs and to check for correct assembly.

5.Replace lower plate.

10

Image 10
Contents MC-V414 MC-V414 Wiring Diagram and Drawing Pictorial Diagram Body Exploded View and Parts ListExploded View Parts List Body Nozzle Housing Parts List Nozzle Housing AC10A2VZV07Exploded View Parts List Packing MaterialInstallation Replacement InstructionsBelt Replacement Lower PlateNozzle Housing Replacement Power Cord Replacement On / Off Switch Motor ReplacementCarbon Brush Replacement Replacement

MC-V414 00 specifications

The Panasonic MC-V414 00 is a versatile and efficient vacuum cleaner designed to meet the needs of modern households. Combining powerful suction capabilities with user-friendly features, this model is perfect for tackling a variety of cleaning tasks in both carpets and hard floors.

One of the standout features of the MC-V414 00 is its robust motor which delivers exceptional suction power, allowing it to easily pick up dirt, dust, and debris from various surfaces. This motor efficiency not only enhances cleaning performance but also contributes to the overall durability of the vacuum, ensuring that it remains a reliable cleaning companion for years to come.

The vacuum cleaner is equipped with a comprehensive filtration system that captures not only large particles but also fine dust and allergens. This system includes a HEPA filter that traps particles as small as 0.3 microns, making it an excellent choice for households with allergy sufferers. The filter is also washable, which adds an eco-friendly element to its design while maintaining optimal performance over time.

A notable feature of the MC-V414 00 is its lightweight construction. Weighing in at under 10 pounds, this vacuum is easy to maneuver around furniture and carry up and down stairs, reducing strain during cleaning sessions. The ergonomic handle design enhances user comfort, allowing for extended cleaning periods without fatigue.

In terms of usability, the MC-V414 00 boasts several practical features, including an automatic cord rewinder that makes storage simple and efficient. The vacuum also features an adjustable height setting, making it suitable for various floor types, ensuring a thorough clean on both high-pile carpets and delicate hard surfaces.

Another key characteristic is the variety of attachments that come standard with the vacuum, including a crevice tool and dusting brush. These attachments allow for easy navigation into tight spaces and thorough cleaning of hard-to-reach areas, increasing the overall versatility of the appliance.

In summary, the Panasonic MC-V414 00 is a reliable, powerful, and user-friendly vacuum cleaner that caters to a range of cleaning needs, making it an excellent investment for maintaining a clean and healthy home environment. With its combination of advanced technologies and practical features, it stands out as an ideal choice for everyday cleaning tasks.