Panasonic AW-RP555N manual Genlock adjustment, Total pedestal adjustment

Operation

4.Set the left end position in the travel range.

Operate the PAN/TILT lever to rotate the camera to the position which is to serve as the left end position.

Press the PRESET 1 and 6 buttons while holding down the MEMORY button.

When the button 5 lamp lights, the setting is completed.

To cancel the setting, press the PRESET 1 and 6 buttons again while holding down the MEMORY button. When the setting is canceled, the button 10 lamp lights.

5.Set the right end position in the travel range.

Operate the PAN/TILT lever to rotate the camera to

the position which is to serve as the right end position.

Press the PRESET 4 and 9 buttons while holding

down the MEMORY button.

When the button 5 lamp lights, the setting is completed.

To cancel the setting, press the PRESET 4 and 9 buttons again while holding down the MEMORY button. When the setting is canceled, the button 10 lamp lights.

6.Use the CONTROL button to switch the pan/tilt head system. and set the travel ranges (limiters) for each system concerned.

Genlock adjustment

If a camera is to be synchronized with an external signal for use, genlock adjustment must be performed for the camera and other equipments.

Either the black burst or VBS (video, burst and sync) signal is used for the external sync signal.

There is no need to perform the genlock adjustment if the camera is not going to be synchronized with an external signal.

For the genlock adjustments, open the camera menu and perform the settings. Refer to the instructions accompanying the camera and cable compensator.

Total pedestal adjustment

When more than one camera is to be used, the black level (pedestal level) of the pictures shot by each of the cameras must be brought into alignment.

Set the black level (pedestal level) using the camera menu. For details, refer to the instructions accompanying the camera.

		GAIN	AUTO	WHT BAL	AWC	SCENE FILE
OPERATE			MANU	A
						USER
			0dB
			L
	CAM	MODE	H	B	NG	1
ON			BAR
	CONT				OK
			CAM
	ON	SHUTTER		ATW	ABC	2
OFF
	OFF					3
	TALLY					PRESET

Multi Hybrid Control Panel AW-RP555

MENU

MENU ITEM YES NO

	2	3	4	5	1	2	3	4
		CONTROL
1	2	3	4	5

5

DEF WIP H/F

(AF)

EXT ND OP

LEVEL IRIS	MEMORY	6	7	8	9
	AUTO
	MANU

10

LAMP

SPEED		ZOOM	FOCUS	PAN/TILT
LOW	TELE		FAR	UP
HIGH
			LEFT	RIGHT
	WIDE		NEAR	DOWN

21