Rowenta 030014 - 4/03 SH325/335 manual Cleaning, Underarms and bikini line

-Long hair: use the clippers. Hold the appliance slightly tilted towards you and move it slowly against the lie of the hair.

-Short hair: use the micro-screen. Hold the appliance at right angles to the skin and move it slowly against the lie of the hair.

To improve efficiency, stretch your skin with your other hand, in order to raise the hairs. In this way, you will obtain a closer shave, with little or no irritation.

If your skin becomes irritated, apply a small quantity of talcum powder. Wait for 24 h before applying perfume or deodorant under your arms.

4) To stop the shaver, turn the switch back to position O (off). The locking switch will be actived automatically.

5) Unplug the power supply unit after use and replace the protective cover.

4. CLEANING

Important : always clean the appliance’s shaving head after use.

Regular maintenance of the shaving head preserves the shaver’s efficiency and extends its lifespan.

1)Ensure that your shaver is unplugged.

2)Remove the protective cover.

3)Release the micro-screen support by pressing on the locking clips and pulling upwards (FIG 5). Carefully remove all hair by blowing on and beneath the micro-screen. Clean the shaving head also, with the brush. Never use the brush to clean the micro-screen.

4)The blade unit and trimmer should be lightly oiled from time to time with sewing machine oil or similar. Put the top part of the shaving head back into place.

CAUTION ! Do not press against the micro-screen when replacing it.

5) Put the protective cap back in place on the shaving head.