•Choose from 2 speed settings. Use setting I on fine hair and setting II on thicker or coarser hair.
•Hold at a 90 degree angle to the area you wish to remove hair from with the BodyBare logo facing away from you.
•Move the appliance in rapid circles, lightly gliding over the skin. There is no need to apply pressure.
•If too much pressure is applied, the appliance many slow down.
•When removing hair it is very important to hold the skin very taut to avoid pinching.
•The appliance is designed to be used on hair as short as 0.5mm so there is no need for stubble to appear before epilating.
Where can I use my epilator?
•The epilator can be used on the legs and underarms.
Use the epilator with the disc cover attached on these areas.
•It can also be used on the bikini line. Use the specially designed bikini line attachment supplied. Remove the disc cover by pulling it off and attach the bikini line attachment and click into place.
•It can also be used on single hairs on the face particularly on the upper lip and chin. Use the facial attachment provided as described above.
•If hair is longer than 5mm, trim with scissors before use.
•The appliance is not suitable for use on the eyebrows.
•The epilator is also supplied with a massaging attachment for very sensitive skin. To use this attachment you must remove any other attachment such as the disc cover or facial attachment.
Attach as described above.