|
|
Shave | Using the shaver |
| |
|
|
Clean
Cleaning
English
1 Depress the switch lock button and slide the 0/1 switch upwards.
2 Hold the shaver as illustrated above and shave.
1. Remove the protective cap. |
2. Apply some hand soap to the |
outer foil. |
3. Turn the shaver on and then |
pour some water over the outer |
foil. (Fig. 1) |
4. Turn the shaver off after |
seconds. |
5. Remove the foil frame while |
pressing the foil frame release |
button and clean it with running |
water. (Fig. 2) |
6. Wipe off any drops of water |
with a dry cloth. |
•Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave.
Using the trimmer (ES3833 only)
Slide the 0/1 switch upwards. Align the “ 
” mark and the “ – ” mark on the body with each other. Place at a right angle to your skin and move downwards to trim your sideburns.
7. Dry the foil frame and the |
shaver completely. (Fig. 3) |