Cleaning & Maintenance, Cleaning Your Shaver

27714_MS2_150_IB 9/1/05 10:50 AM Page 8

Cleaning & Maintenance

Cleaning Your Shaver

Remington® recommends cleaning your shaver after every use for optimal performance.

1. Turn shaver OFF. 2. Press side release

button to flip open head assembly.

3.Screens-Do not use the

brush to clean the screens. Instead, blow the shavings out or rinse the screens under cold or warm water.

4.Cutters and trimmer-Use the cleaning brush to sweep any loose hairs from the cutters and trimmers.

5.After cleaning, return the foils and head assembly to their original position on the shaver.

6.To clean the external surfaces of the shaver, use a damp cloth. Do NOT use strong detergents or other chemicals.

7.To dry, wipe the surface of the overall shaver with a dry towel. Do NOT use a hairdryer or heater to dry the shaver.

Screens and Cutters

To assure smooth, efficient performance, it is important to clean your shaver.

Daily

Blow out the stubble after each shave.

1.Turn the shaver off.

2.Remove the head assembly by squeezing on both release buttons and pulling up from the body of the shaver.

3.Thoroughly blow out the stubble from the screen and cutters.

4.Replace head assembly.

Weekly

Brush out the cutters and trimmer at least once a week.

1.Turn the shaver off.

2.Remove the head assembly by squeezing

on both release buttons and pulling up from the body of the shaver.

3. Use the cleaning brush to sweep out the cutters and

trimmer. DO NOT USE

THE CLEANING BRUSH

ON THE SCREENS. Damage may occur to the

holes in the screens.

4.Replace head assembly. Remington® Shaver Saver® Lubricant (SP-4) lubricates and cleans your shaver's cutters and head assembly. The lubricant helps remove hair clippings while reducing wear. A quick spray after each shave keeps your shaver operat- ing at peak performance.

Cleaning Cautions

■The construction of this shaver is for dry operation only. It is not waterproof. Never put the shaver in part or completely into water.

■Do not use an aggressive cleansing agent as this may destroy the shaver coatings.

■Do not remove or replace the head assem- bly while shaver is running as it may cause damage to the unit's screens or cutters.

■Replace worn or damaged parts with Remington® replacement parts only.

Trimmer Care

Cleaning

1.Turn the shaver off.

2.Extend the trimmer to its maximum height by pressing the right trimmer button.

3.Use the cleaning brush to sweep off any clippings that may have accumulated around the trimmer assembly. Using the supplied brush will enable you to get into the area between the trimmer and the shaver.

Lubricating

1.Every six months apply a drop of light machine oil one-third and two-thirds of the way along the blade.

2.Using your fingertip, spread the oil along the teeth.

3.Run the trimmer for a few seconds to distribute oil.

Replacing Cutters and

Screens

To prevent inadvertent damage to the cut- ters and screens, do not attempt to remove them from the head assembly unless you are replacing them. Removal instructions are included with the cutter and screen replacement packages.

To replace a cutter assembly that is removed unintentionally:

1.Hold the assembly in the middle of the "T".

2.Gently slide the plastic portion of the cutter assembly over the top of the oscillator tip.

3.Do not push downward on the ends of the cutters, as you may bend the cutter, reducing its ability to operate smoothly.

4.Do not remove cutters from the plastic pieces they are attached to, as you may damage the assembly.

When is it time to replace

your screens and cutters? Because they are subject to daily use, the cutters and screens of your shaver will wear and eventually require replacement to maintain a close, comfortable shave. It is very important to replace your screens and cutters when necessary to ensure a close, comfortable shave without irritation.

Depending on your shaving technique and habits, the screens will usually last 6 months; the cutters, 12 months. If you are replacing the cutters, it’s a good idea to replace the screens at the same time.

Here are some signs that your foils and cutters need replacing:

Irritation: As screens get worn, you may notice that your skin feels more sensitive after a shave, particularly when you apply aftershave.

Pulling: As cutters wear, your shave may not feel as close and you may feel your shaver is pulling at your whiskers. Wear-through:You may notice that the cutters have worn through the screens.

The replacement for this shaver is model SP-67 (screens) and SP-69 (screens and cutters).

U.S. residents:

To order shaver accessories call 800-736-4648, visit www.remington-products.com, or visit your local retailer. Canadian residents:

To order shaver accessories, please call 800-268-0425, visit www.remington-products.com

or visit your local retailer.

8		9

MS2-150 specifications

The Remington MS2-150 stands out as an impressive grooming tool in the competitive landscape of electric shavers. Known for its advanced technology and user-friendly design, this model caters to the needs of individuals searching for a clean shave and enhanced grooming experience.

One of the prominent features of the Remington MS2-150 is its dual-sided cutting blades. These blades are meticulously designed to provide a close and comfortable shave, effortlessly gliding over facial contours. This dual-blade system not only enhances the shaving efficiency but also minimizes skin irritation, making it an excellent choice for those with sensitive skin.

Equipped with a turbo boost feature, the MS2-150 excels in handling denser hair. This added power is essential for achieving a thorough shave without causing discomfort. Users can easily activate this function with the press of a button, ensuring they have the necessary power for their specific shaving needs.

The MS2-150 showcases a flexible head capable of pivoting in multiple directions. This feature is crucial for reaching tricky areas, such as under the chin or along the jawline. The swivel design allows the shaving head to adjust seamlessly to the contours of the face, contributing to a more efficient and effective shaving experience.

Another key characteristic of this grooming tool is its ergonomically designed handle. The MS2-150’s grip provides comfort and control, allowing users to maneuver the shaver with ease. This thoughtful design reduces the likelihood of slipping during use, further enhancing safety.

When it comes to convenience, the Remington MS2-150 is equipped with a pop-up trimmer, adding functionality for precision styling of sideburns and mustaches. This feature allows users to transition between shaving and detailing effortlessly, making it suitable for regular grooming routines.

Moreover, the MS2-150 is designed for both corded and cordless operation, offering versatility for users on the go. With a rechargeable battery, it provides the flexibility to shave without being tethered to a power outlet, making it a perfect travel companion.

The Remington MS2-150 not only delivers exceptional performance but is also easy to clean. The removable shaving head allows for quick rinsing under water, ensuring hygiene and maintenance are simple.

In conclusion, the Remington MS2-150 is a robust electric shaver that combines innovative technology, user-oriented design, and convenience features to cater to diverse grooming needs. Its powerful performance, flexible design, and practical features position it as a standout choice for anyone seeking a reliable grooming tool.