HOW to Operate Your Cleaner, Specifications

C - HOW TO OPERATE YOUR CLEANER

C-1Pull out the power cord and put the plug into the socket outlet.

C-2 Power control : OFF

You can turn the appliance ON by turning it to the clockwise direction.

MIN:Lowest suction.

MAX:Highest suction.

C-3 Switching between carpet and ﬂooring Flooring: Press lever A

Carpet: Press lever B

C-4 After you ﬁnish vacuuming, remove the plug from the socket outlet and press the cord rewind pedal. When rewinding the power cord, press the

cord rewind pedal holding the plug so that it does not become damaged.

C-5 Storage position

Slide the wand holder straight into the wand supporter.

C-6 Park position

For short breaks during vacuuming, slide the wand holder into slot on the rear side of main body. NOTE: When you use park position, we suggest that

you switch the appliance off.

D - MAINTENANCE AND SERVICING

CAUTIONS

•The plug must be removed from the socket outlet before cleaning or maintaining the appliance.

•DO NOT use hot air or hot surface to dry ﬁlters. Dry them at room temperature for approximately 24 hours.

•IMPORTANT: Before re-installing the washable ﬁlters, make sure they are completely dry to avoid damaging the appliance.

NOTE:If the paper dust bag is not properly installed, the dust cover will not close. Be sure to check that the paper dust bag is properly installed before operating the appliance, otherwise dust will leak out.

The dust bag can easily lay on the dust cover packing or clip between the bag collar and the body, so be sure to properly extend it into the body of the appliance.

Replacing the paper dust bag

D-1Lift the dust cover catch and raise the dust cover until it clicks properly.

D-2Remove the bag collar from the bag holder and pull out the paper dust bag.

D-3Put in a new paper dust bag.

D-4Close the dust cover properly until you hear it click.

Floor nozzle

D-5Inspect once a month.

Using an old toothbrush or similar tool, clean any dirt or lint from the brush.

Vacuum cleaner body

D-6Wipe with a soft cloth soaked with water.

Maintaining the Pre-motor Filter

Follow the procedure written below when the suction power is not restored after replacing a new paper dust bag.

D-7Open the dust cover.

D-8Remove the pre-motor ﬁlter.

D-9Wash gently with water and then allow to dry in a shaded location.

D-10 Return the pre-motor ﬁlter to its original position. NOTE: Make sure you remember to replace the ﬁlter.

If the ﬁlter is not installed, it will cause motor failure.

•Do not wash the ﬁlter in a washing machine or dry it with a dryer or other source of hot air.

What to do if your cleaner does not work

Check that the appliance is correctly plugged in and that the socket outlet is working. If the thermal cut-out device has operated, wait until it resets automatically after approximately 60 minutes.

If after having checked the above mentioned points, the appliance does not work, take it to an Authorized Service Centre to be repaired.

What to do when the suction performance reduces

•Stop the appliance and unplug from the socket outlet.

•Check whether the wands, hose and accessories are blocked or not. If they are blocked, remove the obstruction.

•Check whether the paper dust bag is full. If it is full, replace it.

•Check whether the pre-motor ﬁlter is blocked with dust. If they are blocked, clean them out or replace them.

SPECIFICATIONS

	MC-CG381
Power source	120 V~60 Hz
Current	10 Amps
Dimensions (W x L x H)	240 mm x 350 mm x 250 mm
Net weight	3.8 kg
Extension wands	Metal x 2
Multipurpose accessory	√

Optional Accessory

Product name	Model number
Paper dust bag (PACK 5/u.)	C-20E

REMINDER FOR CUSTOMER

The model and serial number of this product may be found on the nameplate located on the underside of your appliance. You should note the model and serial number in the spaces provided and retain this book as a permanent record of your purchase.

Model Number. .............................................................................

Serial No. ......................................................................................

Date Purchased. ...........................................................................

Where Purchased. ........................................................................

Mccg381 specifications

The Panasonic MCCG381 is a cutting-edge microwave oven that stands out for its innovative features and modern design. This kitchen appliance is designed to make cooking more efficient and convenient, catering to the needs of busy households while ensuring delicious and consistent results with every use.

One of the standout features of the MCCG381 is its inverter technology, which delivers a continuous stream of cooking power, allowing for even heating and defrosting. Unlike traditional microwaves that use a pulse system, the inverter technology ensures that food is cooked uniformly, reducing the chances of hot spots or overcooked edges. This state-of-the-art cooking method allows users to achieve the perfect texture and flavor for various dishes, making it ideal for cooking delicate foods like seafood or reheating leftovers.

Another key characteristic of the MCCG381 is its multi-stage cooking option. This feature allows users to program multiple cooking stages for a single dish, enabling them to combine different cooking techniques. For instance, one can start with defrosting, followed by cooking, all without needing to intervene or restart the microwave. This user-friendly programming is especially beneficial for those who want to prepare complex meals with minimal effort.

The microwave oven also boasts a sleek, modern design, complete with an easy-to-use control panel and a bright LED display. The intuitive interface is simple to navigate, allowing users to adjust settings with ease. Furthermore, the spacious interior accommodates a wide variety of dish sizes, making it suitable for families or those who frequently entertain guests.

In addition to its cooking capabilities, the Panasonic MCCG381 is designed with safety in mind. It features a child lock function, ensuring that small hands cannot accidentally access the microwave while it’s in use. This added layer of security is an essential feature for households with young children.

Finally, the energy efficiency of the Panasonic MCCG381 should not be overlooked. With a focus on reducing energy consumption, this microwave oven helps users save on electricity bills while being environmentally friendly.

In summary, the Panasonic MCCG381 combines inverter technology, multi-stage cooking, and user-friendly design to deliver exceptional performance in the kitchen. Its safety features and energy efficiency make it an excellent choice for modern cooks looking to enhance their culinary experience.