Mode LED / Analog Button:
Press the Analog Button to switch modes. When the LED is red the controller is in analog mode, and when the LED is off the controller is in digital mode. The Mode LED is located on the Receiver Unit.
Power LED:
The Power LED will come on when you have the Race N Play Wireless switched into channel posi- tion 1, 2, or 3.
Signal LED:
The Signal LED is green and will flicker under normal operation to show data is being trans- fered.
Relocated L2 / R2 Buttons:
The L2 / R2 buttons have been relocated to give the user greater comfort and a much quicker reaction time than other controllers.
6.