Electrical Connections

Cautions:

●This product is designed to operate with a 12-volt negative ground battery system.

●To prevent damage to the unit, be sure to follow the connection diagram below.

●Do not insert the power connector into the unit until the wiring is completed.

●Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle all cables and keep cable terminals free from touching any metal parts.

Receiver

CR-W400U

Antenna (Rear Side)

Power Connector

ACC(Red)

Ground (Black)

Battery (Yellow)

Power Lead (ACC or IGN) To ACC power, +12V DC

Ground Lead

To a clean, bare metallic part of the vehicle chassis

Battery Lead

To the vehicle battery, continuous +12V DC

			Dimmer	(Orange w/White stripe)
			Dimmer		Dimmer Control Lead
					Connect to vehicle dimmer control lead
	(Gray w/black stripe)			(Violet w/black stripe)
(White	(white)	(Gray)	(Green	(Green)	(Violet)
w/black			w/black
stripe)			stripe)

Left Speaker	Right Speaker	Left Speaker	Right Speaker
(Front)	(Front)	(Rear)	(Rear)