Important Safeguards
When using electrical appliances, basic safety precautions should always be followed, including the following:
DANGER!
The Manufacturer does not represent this unit to be water- proof. To reduce the risk of fire, electrical shock, or damage to the unit, do not expose this unit to rain or moisture.
DANGER!
This product has the capability to operate with an optional 9V rechargeable nickel cadmium backup battery, which must be recycled at the end of the life of the battery and must be dis- posed of properly. Do not incinerate or compost batteries, as they will explode at high temperatures. Contact your local authority for information concerning reclamation and disposal of rechargeable
DANGER!
This product has a built in circuit for charging an optional 9V rechargeable nickel cadmium backup battery. When a regular 9V alkaline battery is used as a backup power source, turn the battery selection switch on the back of the unit to “Non- rechargeable” (NB) position to switch off the internal charger.
CHARGING BATTERIES INCORRECTLY CAN CAUSE FIRE AND EXPLOSION AND ENDANGER LIVES.
DANGER!
To reduce the risk of electric shock, do not disassemble this product. Take it to qualified service personal when service of repair work is required. Opening or removing cover may expose you to dangerous voltages or other risks. This unit is fully transistorized and does not contain any parts that can be repaired by the user.
This product is designed to operate using the AC adapter (120V) sup- plied in a household application.
-Do not allow anything to rest on the power cord. Do not locate this product where persons walking on it could damage the cord. Keep cord away from heated surfaces.
-The output terminal blocks for Remote Alert provides a floating relay contact output to external warning devices. The contact will close when an alert broadcast is being received. Do not exceed the maximum current rating of the contacts (0.5A @125VAC or 1A @ 30VDC). Consult a licensed electrician if you want to connect other devices to the radio.
-To disconnect, grip the AC adapter and pull it from the wall out- let. Never yank the cord.
-Wipe unit with a damp cloth occasionally to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.
-When an external antenna is used, make sure that there are suffi- cient lightning protection on the antenna and its cable feed. Make sure all the ground connections are sound and fit. Do not get close to the unit when it is operating under a thunderstorm. Contact your external antenna supplier for more information on lightning protec- tion and grounding issues on your antenna. You could also get information from lightning protection device suppliers.
1