Set Up, Option 2 Setup using a Static IP address

1Set Up

AIf you are only accessing the DVR from a computer attached to the same router:

If you are accessing the DVR from a computer attached to the same router as the DVR, then you only need to setup the information in the NETWORK settings by using either the DHCP option, or assigning a static IP (See instructions below).

Note: Knowing the public IP address is not necessary for this option, as you are just going from one location to another on the same network port forwarding.

After you have setup the network configuration in the DVR, Enter the IP address of the DVR from the NETWORK setup into the Internet Explorer browser window. Follow instructions in “To access the DVR through Internet Explorer.”

There are four options to setup the DVR to be accessed remotely: 1) DHCP 2) Static IP 3) PPOE 4) DDNS

1Option 1: Setup using DHCP (Most common routers are DHCP)

To assign an IP address to the DVR using DHCP, push the Menu Key on the DVR to access the Main Menu (A1). Select the NETWORK option and push SEL to display the NETWORK SETUP screen (A2). Select the DHCP option from the drop down box (to the right of TYPE in A2) and select APPLY. Then click EXIT, and the router will find and assign the DVR an IP address. Go back into the Network Setup/DHCP option and the assigned IP address will be in the space underneath “Web Port.” Write this number down; as this is the IP address you will forward port 80 and 9000 on the router to be able to access the DVR from remote computers.

A1	A2

2Option 2: Setup using a Static IP address

Setup the network configuration on the DVR to work with the settings on the attached router. Static IP: To obtain the router settings, go to the RUN option on a computer that is attached to the same router as the DVR and type “cmd”. Select OK to bring up the command prompt screen (A3). Type IPCONFIG at the prompt (Red arrow, A3) to access the router settings. Write down the Gateway and Subnet Mask Numbers (see green arrows, A3), so you can copy them into the network settings on the DVR (GREEN boxes, A4). Push the Menu Key on the DVR to access the Main Menu (A1). Select the NETWORK option and push SEL to display the NETWORK SETUP screen (A2). Choose the STATIC option from the drop down box (to the right of TYPE, A4).

To set the IP address of the DVR use the same first three sets of numbers as the Gateway and assign a fourth set of numbers that is different from all other devices attached to the same router. For example: if the IP address of your computer in the ipconfig (BLUE arrow, A3) ends with a single or two digit number, you should be okay with any three digit number. If the IP address ends with a number in the 100s, then use a number in the 200s. (IP ADDRESS located in BLUE box, A4).

3Option 3: Attaching the DVR directly to DSL/Cable modem

PPPOE:

PPPOE: Push the Menu Key on the DVR to access the Main Menu (A1). Select the NETWORK option and push SEL to display the NETWORK SETUP screen (A2). Choose the PPPOE option from the drop down box (to the right of TYPE, A5). Enter the PPOE User Name and Password.

Contact your Internet Service Provider for your user id and password

Select APPLY, then EXIT.

Page 1

Page 2

QSD9004V, QSDR16RTC/B, QSDR174RTX, QSDR4RTC, QSD9004 specifications

Q-See is a leading brand in the field of security surveillance solutions, offering a variety of high-quality products designed for both residential and commercial use. Among its extensive product line, the QSDR series stands out, featuring models such as QSDR16RTC, QSDR74RTS, QSDR008RTC, QSDR16RTCB, and QSDR04RTC. Each of these models integrates cutting-edge technology and features tailored to meet diverse security needs.

The QSDR16RTC is a robust 16-channel DVR that supports up to 1080p HD video quality. It features advanced motion detection capabilities and remote viewing through mobile and web apps, allowing users to monitor their premises from anywhere. Its built-in HDD supports large storage capacity, ensuring that recorded footage is available for review when needed. The model also includes a user-friendly interface that simplifies setup and operation.

In contrast, the QSDR74RTS offers a versatile 4-channel system that is particularly apt for smaller installations. This system provides clear 720p resolution video and is equipped with night vision capabilities, ensuring visibility in low-light conditions. Its compact design makes it easy to install, and the system is compatible with a range of additional cameras, enhancing flexibility.

The QSDR008RTC model is another efficient solution, providing 8 channels with full HD video clarity. This DVR also integrates motion alerts and the capability to record continuously, giving users peace of mind that they won't miss crucial footage. Remote access features enable users to retrieve footage conveniently through smartphones or tablets.

Another noteworthy model is the QSDR16RTCB, designed for larger surveillance systems with 16 channels. This system is built with a dual-stream recording feature that allows users to record high-quality video while simultaneously using lower bandwidth for remote viewing. Advanced analytics, such as line crossing detection and intrusion detection, provide users with timely notifications of suspicious activities.

Lastly, the QSDR04RTC is aimed at users seeking a streamlined solution with 4 channels. This model is geared towards budget-conscious consumers while still delivering essential features, including smart motion detection and easy setup. It provides a reliable option for home security or small business surveillance.

Collectively, the Q-See QSDR series models cater to a variety of surveillance needs, from the extensive monitoring capabilities of the QSDR16RTC to the compact efficiency of the QSDR04RTC. Their incorporation of advanced technologies ensures they offer reliable, high-quality surveillance tailored to user requirements, making them ideal choices for enhancing security measures.