Introduction, Operation, Cleaning, Troubleshooting

At the Rear:

Þ Power Cable

Housing

Flourescent Blacklight Bulb

On/Off Switch

Fig. 1

Introduction

Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will enjoy many trouble free hours with this unit. To assist with the care and use of the product we have prepared this short guide.

Operation

This lighting effect has been designed to function on a mains power supply of either 120V~60Hz or 230V~50Hz and has been fitted with a suitable power plug for use with this voltage. Check the label on the unit and the power plug for the correct voltage.

Before beginning operation refer to section on Installing/Replacing Bulbs. Connect to the mains power supply and switch on. The unit should illuminate casting an ultra - violet glow.

The duty cycle for this effect should be no more than 15 minutes on then 15 minutes off.

Installing/Replacing Bulbs

1.Disconnect from main power supply before attempting to install/replace lamp.

2.Ensure that the unit is sufficiently cool, before removing blown lamps.

In order to install the lamp, disconnect from main power supply first. Gently twist flourescent bulb counterclockwise to remove (fig. 1). Replace bulb. Only use the appropriately rated bulb as use of any other lamp may cause the unit to be non-operational.

Finally, before using, check that the bulb is housed correctly.

Cleaning

The most important part of your lighting effect to keep clean is the bulb as this allows the light output to transmit. This should be cleaned with a soft damp cloth. The body of the unit may also be cleaned in the same way. We recommend internal cleaning be carried out by a fully qualified technician.

Troubleshooting

·If the unit is not functional - check main power supply is ‘on’.

·If the bulb does illuminate - shipping may cause bulb to loosen. Tighten bulb.

• If the unit is functional but lamp does not light - lamp may require replacing.

If after trying this solution you still have a problem contact your dealer or CHAUVET.

Maintenance & Servicing

Work on internal parts should be carried out by a qualified technician. Removal of any covers is considered a breach of warranty and will not be covered under any such agreement unless authorized first by the company.

Caution

Power Connections

The unit is supplied with a power plug appropriate to its voltage and destination. Should any other connections be required they must be carried out with the following configuration.

Earth = Green/Yellow cable

Neutral = Blue cable

Live = Brown cable

In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection. In the UK, it is required that all mains plugs are fitted with 5A fuses.

Technical Specifications

Power		120V~60Hz		230V~50Hz

Lamps	Part No. NV-F15BLB			Part No. NV-F15BLB

Dimensions		457mm x 89mm x 38mm / 18in x 3.5in x 1.5in

Weight			0.9kg /1.9lbs


User Information (Please complete for your records)
Date Purchased:	/	/	Serial No:
Dealer Stamp:			Model: NV-F18 18" BLACKLIGHT

No user serviceable parts, please refer to CHAUVET for service.

NV-F18 specifications

The Chauvet NV-F18 is a revolutionary product designed to meet the growing demands of professional lighting applications, particularly in the fields of entertainment, architecture, and event production. This innovative fixture has garnered significant attention in the lighting industry due to its exceptional performance and versatile features.

One of the standout characteristics of the NV-F18 is its robust LED technology. This fixture is equipped with 18 high-output, RGBW LEDs that deliver a powerful and vibrant color output. The incorporation of white LEDs expands the color palette, allowing users to create stunning and dynamic lighting effects. The 25-degree beam angle ensures optimal light placement, making it suitable for both short-range and longer distance applications.

The NV-F18 features advanced DMX control capabilities, allowing for seamless integration into larger lighting setups. With 6 DMX modes, users can tailor the fixture's behavior to their specific needs, whether for complex shows or simpler installations. The fixture also supports RDM (Remote Device Management), enabling quick and easy configuration and troubleshooting without the need for physical access.

In terms of design, the Chauvet NV-F18 is built to last. It features a rugged aluminum housing, which protects the internal components from damage while also providing effective heat dissipation. This ensures long operational life and reliability, even in demanding environments. Additionally, the device includes a double bracket for versatile mounting options, making it easy to position the fixture in any desired orientation.

An important highlight of the NV-F18 is its energy efficiency. The use of LED technology not only results in lower power consumption but also minimizes the need for frequent replacements, which is both cost-effective and environmentally friendly. The fixture has a low operating temperature, making it safe to use in various settings without the risk of overheating.

For sound-sensitive environments, the NV-F18 boasts a silent operation mode, which disables the fan, thereby eliminating any noise that could disrupt presentations, performances, or events. This feature has made it a favored choice among venues where audio quality is paramount.

Additionally, the NV-F18 allows for a range of dynamic effects, including strobe, pulse, and color fade, making it flexible for various applications such as concerts, theater productions, and corporate events. Its user-friendly interface and intuitive controls enhance accessibility for operators of all skill levels.

In summary, the Chauvet NV-F18 is a well-rounded lighting solution that combines power, versatility, and efficiency. With its array of features and technologies, it stands out as a prime choice for professionals seeking high-quality lighting solutions for diverse applications.