This manual should be used for initial set up of the system and for reference purposes.
1.1 GENERAL INFORMATION
The system is a true
The system has been tested and successfully approved with the following standards:
EN
EN
EN 55011 Class B
IEC
FOR US AND CANADA ONLY
Medical Equipment-Air Blower
E228589with respect to electrical shock, fire and 53DGmechanical hazards only in accordance with
Le produit à ététesté avec des équipementsmédicauxetrespecte les normes UL
1.2 INTENDED USE
This product is intended to help treat and reduce the incidence of pressure ulcers from Stage I – Stage IV, while optimizing patient comfort. It is appropriate for use in home care, long term care and acute care settings.
NOTE:Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.
NOTE:L’équipement ne peutêtreutilisés’il y a risque de mélange d’un anesthésique inflammable avec l’airoul’oxygèneouoxydenitreux.
3
11
7.3 AIR FILTER REPLACEMENT
1. Replace the air filter locatedat the bottom of blower.
2.The filter is reusable and can be washed gentlywith a mild detergent and water. Dry the filter before use.
3. Check and replace air filterregularly if environment is dirty.
7.4RECHARGEABLE BATTERY
1.To check if the rechargeable battery has been drained out, unplug the power cord andsee if the Power Failure indicator will light up along with buzzer last for a few minutes.
2.If the Power Failure Alarm is unable to work or the battery might need to be replaced(approximate life expectancy 6 months),user can contact your dealer or notify the
technician for replacement.
8. TROUBLESHOOTING
Problem |
| Solution |
Power is not ON |
| ‧Check if the plug is connected to mains. |
| ‧Check if there is any blown fuse. | |
|
| |
|
|
|
|
| ‧Check if the Quick Connector is rotated to the Lock/on position. |
Alarm is on |
| ‧Check if the power is suddenly shut down. |
| ‧ Check if the connection between air tube connector to blower unit is | |
(Audible & visual) |
| |
| tightly secured. | |
|
| |
|
| ‧Check if all tubing connections along mattress are secured. |
|
|
|
|
| ‧ Pressure setting might be inadequate for thepatient, adjust comfort |
Patient is bottoming out |
| range 1 to 2 levels higherand wait for a few minutes for best |
|
| comfort. |
|
|
|
|
| ‧ Check if the fowler boost adaptor is connected and secured to the |
Automatic fowler boost is |
| blower unit. |
not functioning |
| ‧ Check if the fowler boost sensor pad tightly snapped to the |
|
| designated location inside the bottom of the mattress foam pocket. |
|
|
|
If the above information does not solve your problems, please contact your local agent directly.They might require a technician totake care the problem.