Keeping your shaver in top shape, Accessories

Keeping your shaver in top shape

Automated cleaning

Available at your dealer or Braun Service Centres is the Clean&Charge. It automatically takes care of all cleaning and lubrication needs of your shaver.

Manual cleaning

For easy cleaning after each shave, switch the shaver off. Press the release buttons to lift the shaver foil

(do not remove the foil completely). Switch on the shaver for approx. 5-10 seconds so that the shaved stubbles can fall out.

For a thorough cleaning (weekly), remove the shaving foil and tap it out on a flat surface. Using the brush, clean the cutter block and the inner area of the pivoting head. About every four weeks, clean the cutter block with Braun cleaning agents.

If your skin is very dry and you notice a reduced perform- ance of the shaver, apply a drop of light machine oil onto the shaver foil.

Replacing the shaving parts

The shaver foil and cutter block are precision parts that, in time, are subject to wear. Replace your foil and cutter block every 18 months and get a 25% better shave.* (Shaver foil and cutter block: part no. 7000)

(* Overall evaluation from Braun users comparing their shave with new parts and those used for 18 months.)

Accessories

available at your dealer or Braun Service Centres:

•Shaver foil and cutter block (part no. 7000)

•Wall holder

Subject to change without notice.

This product conforms to the EMC-Require- ments as laid down by the Council Directive 89/336/EEC and to the Low Voltage Regulation (73/23 EEC).

Syncro

7000