![](/images/new-backgrounds/1138039/13803913x1.webp)
Cleaning
The shaver head is suitable for cleaning under running tap
water.
Warning: Detach the shaver from the power supply before cleaning the shaver head in water.
Regular cleaning ensures better shaving performance. Rinsing the shaving head under running water after each shave is an easy and fast way to keep it clean (A):
•Switch the shaver on and rinse the shaver head under hot running water. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.
•Next, switch off the shaver, remove the shaver foil (2) and cutter block
(3). Then leave the disassembled shaving parts to dry.
•If you regularly clean the shaver under water, then once a week apply a drop of light machine oil onto the long hair trimmer (4) and shaver foil.
Alternatively, you may clean the shaver using the brush provided (B):
•Switch off the shaver. Remove the shaver foil and tap it out on a flat surface.
•Using the brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this will damage the foil.
Keeping your shaver in top shape
Replacing the shaver foil and cutter block
To maintain 100% shaving perform- ance, replace the shaver foil (2) and cutter block (3) at least every
18 months or when worn. Change both parts at the same time for a closer shave with less skin irritation.
(Shaver foil and cutter block: 11B)
Environmental notice
This appliance contains rechargeable batteries. In the interest of protecting the environment, please do not dispose of the product in household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.
Subject to change without notice.
This product conforms to the European Directives EMC 2004/108/EC and Low Voltage 2006/95/EC.
For electric specifications, see printing on the special cord set.
7