switched off during brushing. Only when pausing longer than 30 sec. the timer resets to the initial starting point.
Pressure Sensor
For optimal brushing results your toothbrush has a pressure control feature to help you brush gently. This helps protect your gums from excessive brushing and makes your toothbrush easy to operate. If too much pressure is applied, the oscillating movement of the brush head will continue but the pulsation will stop. In addition to feeling it, you can also hear a different sound.
In the first days of using the toothbrush, your gums may bleed slightly. In general, bleeding should stop after a few days. Should it persist after two weeks, please con- sult your dentist or hygienist.
Dentists recommend that you replace any toothbrush every 3 months. The INDICATOR bristles help you monitor and improve your brushing performance. With proper brushing, twice a day for two minutes, the blue colour on the INDICATOR bristles will fade halfway approximately within 3 months, signaling it is time to change the brush head
Replacement brush heads are available at your retailer or
Cleaning
After use, rinse the brush head for several seconds under running water with the handle switched on. Then switch off the handle and remove the brush head. Rinse both parts separately under running water (2) and wipe them dry. From time to time, also clean the charging unit with a damp cloth (3).
Subject to change without notice.
This product conforms to the European Directives EMC 2004/108/EC and Low Voltage 2006/95/EC.
9