Panasonic EX-10 Series manual Flexible mounting, Bright 2-color indicator, Ten times durable

EX-10	SERIES
Ultra-slim Photoelectric Sensor		Amplifier Built-in

Amplifier built-in extraordinarily small and slim size

Conforming to EMC Directive

(Excluding EX-15/17)

UL Recognition

(Excluding 5 m cable length type)

Smallest body, just 3.5 mm 0.138 in thick High-speed response time: 0.5 ms Flexible mounting

It can be mounted in a very small space as its size is just W10
H14.5
D3.5 mm W0.394
H0.571
D0.138 in (thru- beam, front sensing type).

The sensor is suitable for detecting small and high-speed traveling objects.

The diffuse reflective type sensor is front sensing and is so thin that it gives an impression of being just pasted on the mounting base. The thru-beam type is available as front sensing type, as well as, side sensing type, allowing flexible mounting.

Diffuse reflective

•Front sensing type Thru-beam

• Front sensing type • Side sensing type

Bright 2-color indicator

Aconvenient 2-color indicator has been incorporated in the miniature body.

2-color indicator

( Red: Operation indicator )

Green: Stability indicator

Ten times durable

Flexible cable on EX-10-Ris 10 times as durable as conventional model. It is most suitable for moving parts, such as robot arm, etc.

Waterproof

The sensor can be hosed down because of its IP67 construction and the non-corrosive stainless steel mounting bracket.

Note: However, take care that if it is exposed to water splashes during operation, it may detect a water drop itself.

Red beam makes beam alignment easy

The red LED beam projected from the emitter helps you to align the sensor heads.

Operation mode switch

Thru-beam type sensor incorporated with an operation mode switch on the bifurcation is also available. It helps you to test the operability before start- up.

Operation mode switch
		Even for the thru-beam
Operation indicator		type sensor, only three
	EX	wires have to be con-
	SENS.
(Orange)	-17
		nected.

226 08/2005