12ENGLISH
Placing or removing razor from charging stand:
C◗ Always place razor in stand in an upright position making sure charging contacts in
bottom of stand fit into recess in bottom of razor.
C◗ Always remove razor from stand by lifting straight up. Do not tilt razor.
◗ Always unplug the charging stand from the electrical outlet immediately after use, except when razor is (re)charging.
◗You can store the razor in the charging stand.
C1 Connect the small plug into the charging
stand and put the power plug into any 100V to 240V AC outlet. Use only the cord and charging stand provided.
2Charging requires a full 8 hours.A fully charged razor has a cordless shaving time of up to 30 minutes.
ENGLISH 13
Filling Razor Cartridge
◗Only use NIVEA FOR MEN Shaving Conditioner to refill the shaving conditioner cartridge. Any other lotion may cause damage
to your razor.
C 1 Remove the tab of the NIVEA FOR MEN Shaving Conditioner bottle (Model HS800).
C2 Turn the cap on the shaving conditioner
bottle clockwise.
The cap moves down and the shaving conditioner nozzle appears.
3Place the nozzle of the conditioner bottle into the opening of the conditioner cartridge on the back of the razor.
C 4 Move the bottle up and down
approximately 5 times to pump the
shaving conditioner into the cartridge until you see that the shaving cartridge is full. Do not fill the cartridge beyond the visible part.
BE CAREFUL NOT TO OVERFILL SHAVING
CARTRIDGE.
5Remove nozzle of the shaving conditioner bottle from shaving conditioner cartridge and turn the cap counterclockwise until the nozzle is flush with the top of the cap. Replace the tab on top of the shaving conditioner bottle.