![](/images/new-backgrounds/1326050/32605019x1.webp)
18ENGLISH
Once A Month: Razor Heads
For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Philips Norelco Razor Cleaner, model RC1776, or rubbing alcohol) and lubricated with Philips Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads.
After Each Use: Trimmer
1Turn razor OFF.
2 | Push down |
C 3 | Clean trimmer with the brush every time |
| you use it. |
C 4 | Lubricate the trimmer teeth with Philips |
| Norelco Razor Lubricant (model AL80) or |
| with one drop of mineral oil every 6 |
| months. |
5Close trimmer by pressing trimmer down.
This razor has no other
Any other service should be performed by the
Philips Norelco Service Location.
ENGLISH 19
Storage
◗ Be sure razor is turned off. Remove cord from outlet and razor before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.
◗ Do not wrap cord around razor when storing. ◗ Store cord in a safe location where it will not
be cut or damaged.
◗ Do not keep razor permanently plugged into outlet.
◗ Do not place or store razor where it can fall or be pulled into a tub or sink, water or other liquid while plugged in.
C ◗ Put the Protective Razor Head Cap on razor to protect heads.
Assistance
◗For assistance, call toll free:
◗Information is available 24 hours a day, 7 days a week.