Philips 7380XL, 7360XL manual Replacing the Razor Heads, Storage, After Each Use Trimmer

18ENGLISH

C

8Replace the frame.

9Press down (1) and turn the black

3-pronged locking bracket clockwise (2) until it locks into place.

10 Close the Razor Head Assembly.

ENGLISH 19

Replacing the Razor Heads

◗Replace the razor heads once a year for optimal shaving results.

◗Replace damaged or worn razor heads with model HQ8 Philips Norelco razor heads only.

Storage

Once A Month: Razor Heads

For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. rubbing alcohol) and lubricated with one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads.

After Each Use: Trimmer

1Turn razor OFF.

2 Push down spring-release trimmer switch.

C3 Clean trimmer with the brush every time you use it.

C 4	Lubricate the trimmer teeth with one
	drop of mineral oil every 6 months.
5	Close trimmer by pressing trimmer down.

	◗ Be sure razor is turned off. Remove cord from
	outlet and razor before storing in a safe, dry
	location where it will not be crushed, banged,
	or subject to damage.
	◗ Do not wrap cord around razor when storing.
	◗ Store cord in a safe location where it will not
	be cut or damaged.
	◗ Do not keep razor permanently plugged into
	outlet.
	◗ Do not place or store razor where it can fall
	or be pulled into a tub or sink, water or other
C	liquid while plugged in.
	◗ Put the Protective Razor Head Cap on razor
	to protect heads.

This razor has no other user-serviceable parts. For assistance call 1-800-243-3050.