Cleaning
◗Do not use water or a moist cloth to clean the Groomer.
◗Always switch Groomer OFF before cleaning.
◗Do not use abrasive, scourers or liquids such as alcohol, benzene, bleach or acetone to clean the Groomer and attachments.
◗Never clean, replace or remove Groomer attachments with motor ON.
◗Do not apply pressure to cutters.
◗Do not touch cutters with hard objects as this may damage them.
◗Do not use while bathing, showering or immerse the Groomer in water or other liquids as damage to Groomer may occur.
During Use:
◗If cut hairs have accumulated in the Guide Comb area, remove hairs by shaking, blowing or using cleaning brush provided. Remember to adjust the trimming length back to your selected setting when you replace the guide comb on Groomer.
After Each Use:
1Make sure the Groomer is switched OFF and disconnected from the electrical outlet.
2Remove any attachment.
3Also separate the top part of the mini shaver attachment from its body (fig. 28).
4Blow and/or shake out any hair that may have accumulated in the attachment.