Specifications:
Power Output
80 watts RMS minimum per channel both channels driven into 8Ω from 20Hz to 20kHz at no more than 0.012% Total Harmonic Distortion from 0.08 watts to rated output.
Prior to clipping | 90 watts RMS into 8Ω | |
Total Harmonic Distortion |
| |
0.08 watts to rated output | < 0.012% | |
Rated power output at 1kHzTypically 0.004%
Intermodulation Distortion (S.M.P.T.E. method 60Hz and 7kHz mixed 4:1)
80 watts into 8Ω | 0.018% |
8 watts into 8Ω | 0.012% |
0.8 watts into 8Ω | 0.006% |
0.08 watts into 8Ω | 0.006% |
Frequency Response
Rated output into
Transient Response | ............................... | 0.08μs |
Slewing Rate | 70 V/μs | |
Phase Response | +1° at 20Hz | |
Dynamic Headroom | 1.5dB | |
Power Bandwidth10Hz to 100kHz +0dB
Intermodulation Bandwidth | ...........< 0.018% | |
Damping Factor |
|
|
8Ω at 40Hz | > 150 | |
Input Sensitivity (for rated output) | ||
Auxiliary and Tape | 80mV RMS | |
Phono | 2mV RMS @ 1kHz | |
Input Overload |
|
Auxiliary and Tape | 4V RMS |
Phono | 94mV RMS |
Channel Separation |
|
1kHz | 50dB |
Noise |
|
Auxiliary and Tape | 91dBA* |
Phono | 72dBA* |
................................................. | * input shorted |
Tone Controls |
|
Bass | +15dB |
Mid | +9dB |
Treble | +12dB |
Loudness (shelving type)
................................................ +7dB at 50kHz
................................................ +7dB at 15kHz
Filters
Low 6dB per octave from 40Hz
20Hz | |
10Hz | |
High 6dB per octave from 2kHz | |
4kHz | |
8kHz | |
Dimensions |
|
Width | 483mm (19.0”) |
Height | 145mm (5.8”) |
Depth | 410mm (16.1”) |
Weight | 11.0kg (24.6lb) |
;Schematic diagram : Product manual
info@perreaux.com | www.perreaux.com |