1. TO CHARGE
■Use only the cord provided.
■(Re)charge at tempera- tures between 40°F and 95°F. Charging at lower
or higher temperatures adversely affects life- time of batteries.
1.Slide and depress ON OFF switch to OFF.
2.Connect cord to razor. Plug into 100V to 240V AC/DC outlet.
3.Green Charging Indicator Light will light to indicate razor is (re)charging.
4.Charging requires a full 8 hours.
■(Re)charging longer than required period of time will not harm razor. However, continuously
c h a r g i n g r a z o r w i l l reduce life of batteries.
1A.TO RECHARGE
1. Recharging requires 8 |
hours for approximately |
2.CORD/CORDLESS SHAVING
CORD
1.Connect cord provided to razor.
2.Plug into 100V to 240V AC/DC outlet.
3.Slide and depress ON/ OFF switch ON. Begin shaving.
4.Turn razor OFF and un- plug.
IMPORTANT: It is not recommended that this razor be used exclusively as a corded razor. Continual use as a corded razor as well as continuously charg- ing razor will reduce life of batteries.
NOTE: Razor does not recharge during corded shaving.
CORDLESS
1. Charge according to directions. Unplug razor from outlet.
3.ADJUSTABILITY BAND
1.Select position best suited for your skin and beard type and which will give you the most comfortable shave.
2.Each position is indicat- ed by a clicking sound. Move Adjustability Band
(Fig. 1) on razor clock- wise for a lower setting and counterclockwise for a higher setting.
■Lowest setting for sen- sitive skin/soft beard (#1).
■Highest setting for not so sensitive skin/tough beard (#9).
■Choose one setting for “custom” shaving cheeks/ chin, another “comfort” setting for neck.
4. SHAVING
1.Remove Protective Razor Head Assembly Guard. Turn razor ON.
2.Shave against the direc- tion of beard growth using a quick, circular motion.
3.Keep the skin taut using your fingers to stretch the skin so blades can lift and cut whiskers off (Fig. 2).
4.Easy does it. Gently press the razor to your skin so the floating heads can follow the contours of your face.
5.Turn razor OFF (and unplug if shaving with cord).
IMPORTANT: Clean razor head regularly following MAINTENANCE instruc- tions.
5.POP-OUT TRIMMER
1.Switch razor ON.
2.Push Trimmer Slide Switch up to pop out Trimmer.
3 . H o l d T r i m m e r , a s shown (Fig. 3), to exact hairline desired. Move Trimmer downward with gentle pressure.
4.Close Trimmer by push- ing Trimmer Slide Switch down.
5.Turn razor OFF (and unplug if shaving with cord).
6. TO CLEAN TRIMMER
1.Switch razor OFF (and unplug if shaving with cord).
2.Push Trimmer Slide Switch up to pop out Trimmer.
3.Brush out Trimmer sec- tion using long bristles of brush (Fig. 4).
4.Lubricate Trimmer teeth twice a year with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (Fig. 5).
5.Close Trimmer by push- ing Trimmer Slide Switch shown.
7.MAINTENANCE/ CLEANING INSTRUCTIONS
IMPORTANT
■Always switch razor OFF and remove plug from outlet before cleaning.
■Always store razor with Protective Plastic Head Guard on Razor Head Assembly.
■Never clean, remove or replace head assembly while motor is on.
■Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage precision- made slotted combs.
■Do not use razor if combs are damaged or broken.
2 weeks of 3 minute |
shaves per day. |
2. If razor has not been |
used for at least a |
month, razor must be |
recharged for a full 8 |
hours (see TO CHARGE). |
2.Slide and depress ON/ OFF switch ON. Begin shaving.
1 |
2 |
3 |
4 |
5 |