24ENGLISH
Note: Individual shaving heads are not removable from the Razor Head Assembly.
C 3 Rinse all three shaving heads and three hair chambers under hot tap water by letting the water run in and around all the openings for at least 30 seconds.
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
C 4 You can also immerse the Razor Head Assembly in hot water with some liquid soap or a degreasing liquid (e.g. alcohol) for at least 30 seconds.
Make sure the razor is ON to thoroughly remove any residue. Rinse Razor Head Assembly completely under hot tap water before using razor.
5Carefully shake off excess water and leave the shaving heads open to dry the Razor Head Assembly completely.
C6 Press each shaving head back onto the 
Razor Head Assembly. You will hear a
‘click’.
7 Allow Razor Head Assembly to completely air dry before storing.
ENGLISH 25
Razor Head Assembly:With A Brush
1Turn razor OFF.
C2 Using your thumb and forefinger pull each 
individual shaving head open.
Note: Individual shaving heads are not removable from the Razor Head Assembly.
C3 Brush out hairs from each shaving head 
and hair chamber with the supplied brush.
C4 Press each shaving head back onto the 
Razor Head Assembly. You will hear a
‘click’.
Trimmer:After Each Use
1Turn razor OFF.
C2 Push the trimmer slide switch forward to slide out the trimmer.