Philips CM-20 manual General Comments, II. Specimen Exchange

Page 1

OPERATION PROCEDURES FOR PHILIPS/FEI CM-20

TRANSMISSION ELECTRON MICROSCOPE

General Comments

Normally the microscope will be left in the power ON (standby ready to operate) condition; i.e., all circuits will be continuously energized and the microscope will be under full vacuum (MAIN, VACUUM, HIGH TENSION lamps on the right control panel are all lit if the PANEL DIM is pressed). If it is not in this condition do not operate the microscope. Seek help from authorized personnel.

If the microscope is in standby ready condition, proceed with the following abbreviated procedures for high voltage application and alignment before beginning any observation. If the microscope is not properly aligned, good results will not be obtained.

I.Start-Up (This procedure is when the microscope starts from cold)

(1)Run the cooling water (for vacuum and lens systems).

(2)Turn on the main power line (in mechanical room, behind the microscope room).

(3)Press the ON power switch on MICROSCOPE. The microscope will go through a series of self check by the computer program. It will automatically turn on VACUUM SYSTEM, and reach to the high vacuum state as indicated by the UHV and HI VAC lights.

II.Specimen Exchange

(i)Specimen Unloading:

(1)Make sure specimen position is at center, i.e., SHIFT (right at 0, left at 10), TILT indicator at 0 and 11 (HOLDER/azimuth) and tilt drive is engaged.

(2)From holding position (B): Pull out the specimen holder gently until it no longer moves and then turn it clockwise about 180 degree until it stops (A position, make sure it no longer turns, the indicator box face down).

(3)Gently extract the holder from the airlock.

(4)Place the specimen holder onto a proper sample holder stand/support for specimen loading/unloading.

(ii)Specimen Loading:

(1)Set specimen onto suitable specimen holder. USE GLOVES! Caution: No direct contact of your hand with a specimen holder and any other part which will be placed inside the microscope.

WAC, 09/27/02

1

Page 1 Page 2
Image 1
Page 1 Page 2
Contents II. Specimen Exchange General CommentsIf Pictures taken If no pictures takenPage II. To Apply High Voltage Before Starting, VerifyIII. To Apply Filament Current Center Filament Image and Alignment of Condenser System Voltage Center Alignment Alignment of Imaging SystemIii Intermediate and Project Lens Alignment Ii Current Center Alignment OptionDAstigmatism Correction of Objective Lens .5.4 in TEM manual Iv Insertion and centering objective apertureFinal Comments VI. Computer Alignment and Astgmatism Correction for 200 kV

CM-20 specifications

The Philips CM-20 is a dynamic and innovative multimedia speaker system that enhances the audio experience for users yearning for rich sound quality and versatile functionality. Designed with modern aesthetics and cutting-edge technology, the CM-20 is ideal for home entertainment setups, providing user-friendly features that cater to audio enthusiasts and casual listeners alike.

One of the standout features of the Philips CM-20 is its powerful audio output, delivering deep bass and crisp highs. Its advanced speaker design includes well-engineered drivers that ensure a balanced sound profile, making it suitable for various audio genres, from classical to contemporary. The system is equipped with a built-in amplifier, which optimizes performance and ensures minimal distortion even at higher volumes.

Connectivity is a key aspect of the CM-20. It boasts multiple input options, including Bluetooth, USB, and RCA. This allows users to easily connect a variety of devices, such as smartphones, tablets, and computers, enabling seamless streaming of music. The Bluetooth capability is particularly noteworthy, as it permits users to enjoy wireless audio playback without the hassle of tangled cords.

The user-friendly interface of the Philips CM-20 is another highlight. It features intuitive controls that make it easy to adjust volume, bass, and treble settings, allowing users to customize their audio experience to their personal preferences. Additionally, the speaker system includes a remote control for added convenience, enabling users to manage playback from a distance.

In terms of build quality, the CM-20 combines durability with sleek design. Its compact size makes it easy to integrate into any living space, while the aesthetically pleasing finish enhances the overall décor. The system is built to last, providing a robust solution for long-term use.

Another key characteristic of the Philips CM-20 is its energy efficiency. The speaker system is designed to minimize power consumption without compromising performance, making it an eco-friendly choice for audio lovers.

In summary, the Philips CM-20 stands out with its powerful audio capabilities, versatile connectivity options, user-friendly controls, and appealing design. It represents a great addition to any home audio setup, providing an enjoyable listening experience suitable for any occasion. Whether for casual use or dedicated listening sessions, the CM-20 is engineered to impress.
Top Page Image Contents