Oregon Scientific RAR621 Temperature, SET Alarm Stop Alarm, Activate Alarm, Select Channel Number

SET ALARM	STOP ALARM
1. Press to display the type of Alarm you wish to	To stop the alarm from ringing, Press .
set: Weekday or Single.

EN

2.Press and hold again for 2 seconds. The Alarm settings will blink.

3.Select the hour and minute. Press or to change settings. Press To confirm.

ACTIVATE ALARM

Press or to activate or deactivate the Alarm. "-:--" indicates that the alarm is deactivated.

TEMPERATURE

This product can display current, minimum, and maximum temperature information collected by the remote sensors and main (indoor) unit.

Outdoor data is collected and displayed every 78 seconds. Indoor data is collected and displayed every 10 seconds.

SELECT CHANNEL NUMBER

Press CHANNEL to switch between sensors 1-3.

The icon shows the selected sensor.

Kinetic- wave icon

Designat-	Indoor	Remote	Remote	Remote
ed	Display	Display	Display	Display
Display		Channel 1 Channel 2 Channel 3

To auto-scan between sensors, press and hold CHANNEL for 2 seconds. Each sensor's data will be displayed for 3 seconds. To end auto-scan, press CHANNEL or MEM.

11

RAR621 English R4 OP 11 8/18/04, 5:29 PM

Black