Indoor and Outdoor Temperature, Reset | Oregon Scientific RAR232

INDOOR AND OUTDOOR TEMPERATURE

If no readings are received from the remote unit for more

than 4 minutes, blanks, “ ” w ill be displayed until further readings have been successfully searched. Check that the

remote unit is sound and secure. You can wait for a little

while or press	and	simultaneously to force an
immediate search.

INDOOR TEMPERATURE

The indoor temperature is shown in the second line of the display.

OUTDOOR TEMPERATURE

The outdoor temperature is shown on the top line of the display. The kinetic wave on the outdoor temperature display shows if remote unit reception is connecting properly.

	NOTE	If the temperature exceeds the temperature range
	of the main or remote units “				HHH	” (above) or “ LLL ” (below)
will display.
MAXIMUM AND MINIMUM TEMPERATURES
The maximum and minimum indoor and outdoor temperatures
are automatically stored in memory. To display them:
1. Press		MEM	to display the maximum temperature.
2. Press		MEM	again to display the minimum temperature.
The respective indicators,					MAX	or MIN	, will be displayed.
CLEAR MEMORIES
To clear the memory, press and hold						MEM	for two seconds.
If you wish to set the current temperature as the min / max
records, pres			MEM	again.

LOW BATTERY WARNING

When it is time to replace the batteries, the respective low

battery indicator will appear on the indoor and outdoor temperature windows.

RESET

Use this button when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values.

TROUBLESHOOTING

Problem	Symptom	Remedy
Remote unit,	Cannot locate	Check batteries
is displayed on	remote unit
is displayed on	remote unit	Check location
the main unit		Check location
the main unit
LCD

Calendar	Unusual date /	Change language
	month
Temp	Shows “LLL” or	Temperature is
	“HHH”	out-of-range

RAR232A-E CP5.P65

10/4/05, 11:29 AM