561R Infrared Thermometer Quick Reference Guide
Features
The Thermometer includes:
•
•Backlit Display
•Current Temperature Plus MIN, MAX, DIF Temperature Displays
•Easy Emissivity Selector
•
•Two AA Batteries
•Users Manual on CD
Operating the Thermometer
To measure temperature, pull and hold trigger. Release the trigger to hold a temperature reading. The thermometer turns off when no activity is detected for seven seconds.
Safety Information
Warning
A Warning identifies conditions and actions that pose hazards to the user. To avoid electrical shock or personal injury, follow these guidelines:
• Do not point laser directly at eye or indirectly off reflective surfaces.
•Before using the Thermometer inspect the case. Do not use the Thermometer if it appears damaged. Look for cracks or missing plastic.
• Replace the batteries as soon as the battery indicator ( ) appears.
•Do not use the Thermometer if it operates abnormally. Protection may be impaired. When in doubt, have the Thermometer serviced.
•Do not operate the Thermometer around explosive gas, vapor, or dust.
•Do not connect the optional external probe to live electrical circuits.
•To avoid a burn hazard, remember that highly reflective objects will often result in lower than actual temperature measurements.
•Do not use in a manner not specified by this guide or users manual or the protection supplied by the equipment may be impaired.
Caution
To avoid damaging the thermometer or the equipment under test protect them from the following:
•EMF
•Static electricity.
•Thermal shock (caused by large or abrupt ambient temperature changes- allow 30 minutes for the Thermometer to stabilize before use).
•Do not leave the Thermometer on or near objects of high temperature.
Symbols
Symbol | Explanation |
| Risk of danger. Important information. See Manual. |
| Warning. Laser. |
| Conforms to requirements of European Union and |
| European Free Trade Association (EFTA) |
| Do not dispose of this product as unsorted municipal |
| waste. Contact Fluke or a qualified recycler for |
| disposal. |
| Battery |
| Chinese manufacturing mark for products |
| manufactured in the Peoples Republic of China (PRC) |
Battery Replacemant
Battery door locking latch
Laser
Trigger
AA
Batteries
(2)
(+)
Battery
Cover
Display
Function Buttons
Thermometer Buttons
Button | Description |
Press | and then press to toggle between the MIN, |
MAX, and DIF options. | |
|
|
The | button is used to show the MIN, MAX, and DIF |
functions in the secondary display, whichever was pressed | |
most recently. | |
| |
Selects the emissivity setting. You can toggle between LO | |
(0.3), MED (0.7), or HI (0.95) using . You may need | |
to adjust emissivity for shiny metalic objects.
PN 2797301 December 2006
©2006 Fluke Corporation. All rights reserved. Printed in USA.