MODEL 306 DUAL CHANNEL DATALOGGING THERMOMETER
5.0Setup ThermoLog (Thermo DataLogger) - RS232 Interface Software:
The ThermoLog package contains:
1.Two 3.5” diskettes
2.Custom designed RS232 cable for ThermoLog
System Requirements:
Windows 95, Windows 98 or Windows NT 4.0
Minimum Hardware Required:
ξ
MODEL 306 DUAL CHANNEL DATALOGGING THERMOMETER
3.0 Symbol Definitions and Feature Locations:
: Low battery indication. Battery voltage is not sufficient for proper operation.
: Indicates ‘Auto Power Off’ is enabled
: Indicates that the display data is being held MAX : The Maximum value is now being displayed MIN : The Minimum value is now being displayed
REC : Indicates that the instrument is recording. When flashing, the memory is full.
ξ At least 5 MB hard disk space available to install ThermoLog program ξ Recommended display resolution is 800x600.
Install ThermoLog:
T1, T2,
: Indicates location of thermocouple being displayed and differential display.
1.Close all other applications before installing ThermoLog software.
2.Insert setup diskette 1 in floppy disk drive.
3.Choose the Start button on the Taskbar and select Run.
4.Type a:\setup and choose OK to copy ThermoLog.exe (executable file) and Help file to your hard disk (default is c:\program files\thermolog).
For further operating instructions, please refer to the online help while executing ThermoLog.
6.0 ThermoLog Main Menu
–: Negative temperature indication
y : Indicates year is displayed in the main window °C°F : Centigrade or Fahrenheit indication
K : Thermocouple type indication
h:m : Indicates the value below is hour and minute
m:s : Indicates the value below is minute and second
|
|
|
|
| 5. Click to exit |
|
|
|
|
| ThermoLog. |
1. Click to show |
|
| |||
the present graph |
|
| |||
window. |
| 6. Click to show | |||
| |||||
|
|
|
|
| |
2. Click to show |
|
| |||
graph, panel and |
|
| |||
tabular window. |
| 7. Click to load the | |||
|
|
|
|
| recorded data from |
|
|
|
|
| thermometer. |
|
|
|
|
| 8. Click to show |
|
|
|
|
| |
3. Click to show |
| the present list | |||
panel window. |
| data. | |||
|
|
|
|
| 9. Indicates |
|
|
|
|
| thermometer is |
4. Click to test if there is any |
|
|
|
| connected. |
|
| ||||
thermometer connected to PC. |
|
| |||
1.Graph:
The
2.Universal Display:
The Universal Display window displays both graphical and tabular information plus the control panel in one complete presentation.
3.Control Panel:
The Control Panel Window emulates the thermometer panel to control the connected thermometer via the buttons in this window.
4.Link Test:
Open the Link Test window to search for a thermometer connected to the PC. Upon startup of ThermoLog, this window appears while searching for a thermometer. Results are shown in the text box.
21
2T | 1T |
T2 T1
3
47
5 | SETUP |
|
| 8 |
|
|
| ||
| TIME | HOLD |
| |
6 | CLOCK | INTV | 9 | |
|
|
| ||
| REC | C | F |
|
| RANGE: & | & |
| |
| ) |
| ) |
|
REC
CAL
DC9V OUTPUT
10
9V BATTERY
NEDA 1604 6F22 006P
PLEASE READ
MANUAL FOR SAFETY
OPEN
Feature Locations:
1)T1 Type K temperature sensor connector
2)T2 Type K temperature sensor connector
3)LCD display
4)ON/OFF button
5)Time display button
6)Record button
7)MAX MIN function control button
8)HOLD button
9)°C, °F control button
10)Offset calibration screw
11)Digital output connector (RS232)
12)AC power adapter connector
13)Tripod connector
14)Battery cabinet cover
5
2