Omega Vehicle Security HH501AJ manual MIN MAX record Mode, Timer STOP-WATCH Mode

Page 7

6MIN MAX record Mode

Press MIN MAX key to enter the MIN MAX Recording mode, (displays the Maximum reading, Minimum reading, "MAX-MIN" reading and Average

reading stored in record mode). In the this mode the automatic power-off feature is disabled and key and all function key are disabled.The beeper emits a tone when a new minimum or maximum value is recorded.

Push MIN MAX key to cycle through the MAX, MIN, MAX-MIN and AVG readings.

If an overload is recorded, the averaging function is stopped and average value display"-OL".

In the this mode, press HOLD key to stop the recording of readings, all values are frozen, press again to restart recording.

To prevent accidental loss of MIN, MAX, "MAX-MIN" and AVG data, in this mode can only be cancelled by pressing and hold down the MIN MAX key for 2 seconds to exit and erased recorded readings.

78 9 TIMER STOP-WATCH Mode

Press TIMER STOP-W key to enter stop-watch mode stop-watch is displayed. Press START/STOP key to toggle stop-watch starts and stops (Time goes up to 19 minutes & 59.9 seconds). Press CLEAR key to display 0.1 second , then press again to zero the stop-watch.

Press TIMER STOP-W key again to exit the stop-watch mode.

5

Image 7
Contents Omega Omega.comTM Introduction Safety InformationElectrical SpecificationsEnvironmental Operating Instructions Power SwitchF Selecting the Temperature Scale Hold Mode9 Timer STOP-WATCH Mode MIN MAX record ModeSET mode Relative value set and Hi/Lo Limits value set REL Relative mode only Main display12 Hi/Lo Limits mode Battery Replacement Operator MaintenanceWarranty / Disclaimer 2817/0799