Harbor Freight Tools 66106, 67144, 69482 User-Maintenance Instructions, For all lever chain hoists

Page 7

5.WARNING! Turn the Brake Knob clockwise until it stops before lifting or lowering a load.

6.Move the Selector Lever to the up position (see Figure H) and ratchet the

Lever Handle to lift the load.

9.To lower the load, turn the Selector Lever to the down position (see Figure I) and ratchet until the load is resting fully on the work area.

WARNING! DO NOT LOWER BY TURNING BRAKE KNOB OR LOAD WILL FALL.

Turn Brake Knob clockwise to engage brake

D

U N

 

 

11/2 TON

 

 

LEVER CHAIN HOIST

U

D

Figure I: 66106/96482 Selector Lever

N

 

11/2

TON

“D” / Down Position

LEVER CHAIN HOIST

 

Figure H: 66106/96482 Selector Lever

and Brake Knob “U” / Up Position 10. Disconnect Hoist, clean, then store the tool indoors out of children’s reach.

Note: If there is slack in the load chain, you may

 

 

 

need to pull on the load chain slightly to get the

 

 

 

User-Maintenance Instructions

 

ratchet to engage until the slack is taken up.

 

7. Lift load slightly and stop momentarily to make

(for all lever chain hoists)

 

sure the load brake works before proceeding.

Procedures not specifically explained

WARNING! Keep bystanders and

in this manual must be performed

pets away when a load is raised.

only by a qualified technician.

 

Do not work under a raised load.

 

 

 

 

8. If the load is to be moved, lower it close to the

 

 

 

 

 

 

ground prior to attempting to relocate the load.

 

 

 

TO PREVENT SERIOUS INJURY

 

Do not touch the Selector Lever until

FROM TOOL FAILURE:

 

the load is ready to be lowered.

 

Do not use damaged equipment.

 

 

 

 

 

 

If abnormal noise occurs, have the

 

 

 

problem corrected before further use.

 

 

 

1. BEFORE EACH USE, inspect the general

 

 

condition of the tool. Check for loose screws,

 

 

misalignment or binding of moving parts,

 

 

cracked or broken parts and any other

 

 

 

condition that may affect its safe operation.

 

 

2. AFTER USE, clean surfaces of

 

 

 

the tool with clean cloth.

 

 

 

3. WEEKLY, lubricate all chain links. Apply new

 

 

lubricant on top of the old layer of lubricant.

 

 

4. PERIODICALLY, lubricate the moving

 

 

 

parts of the Hoist with white lithium

 

 

 

grease, but not the braking system.

 

Lever Chain Hoist

For technical questions, please call 1-800-444-3353.

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Lever Chain Hoist Save This Manual General Safety RulesSpecifications Work area safetyBe aware of dynamic loading Personal safetyDamaged, disabled, or missing safety latch Breakage of parts,Selector Lever Safety latch Selector Lever Handle Load Hook67144 1/4 Ton Operating Instructions Top HookFigure D 67144 Selector Lever Up Position 96482 3/4 Ton 66106 1-1/2 Ton Operating Instructions Top Hook Safety latch Brake Knob Selector LeverFor all lever chain hoists User-Maintenance InstructionsParts Lists and Diagrams Parts ListRecord Product’s Serial Number Here Assembly Diagram 96482 Parts List 96482 Assembly Diagram Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Limited 90 Day Warranty

66106, 67144, 69482 specifications

Harbor Freight Tools is known for offering a wide range of affordable and high-quality tools for both professionals and DIY enthusiasts. Among their extensive inventory, three notable products stand out: the 69482, 67144, and 66106. Each of these tools features advanced technologies and characteristics designed to enhance functionality and user experience.

The Harbor Freight Tools 69482 is a 4-inch portable electric hobby tool that excels in versatility. This compact tool is equipped with a powerful motor, enabling it to tackle a variety of tasks from cutting to sanding and grinding. Its lightweight design makes it easy to handle, ensuring that users can work on intricate projects without experiencing excessive fatigue. One of the standout features of this model is its compatibility with multiple accessories, allowing users to switch out attachments seamlessly. The ergonomic grip further enhances comfort, while the built-in safety features protect users from potential hazards.

The 67144 model is a 12-inch sliding compound miter saw. It incorporates advanced laser guide technology that provides precise cutting lines, ensuring accuracy in every cut. This model is equipped with a powerful motor that delivers high RPM, allowing users to make clean cuts in various materials such as wood, plastic, and metal. The sliding feature is particularly beneficial for cutting wider boards, providing flexibility for larger projects. Additionally, the miter saw offers a variety of angle adjustments, making it suitable for complex miter cuts and bevels. The sturdy construction and durable materials contribute to a long lifespan, making this tool a reliable addition to any workshop.

Meanwhile, the 66106 tool is a 10-inch table saw that is ideal for woodworking enthusiasts and professionals alike. Featuring a high-capacity rip fence, this table saw ensures accurate and consistent cuts, vital for creating precise joints and fittings. Its powerful motor allows it to handle dense materials with ease, while the adjustable blade height and bevel settings provide flexibility for various cutting requirements. Safety is a key consideration with the 66106, which includes features such as a blade guard and push stick to minimize the risk of accidents. The portable design makes it easy to move between job sites, offering convenience without sacrificing performance.

In summary, the Harbor Freight Tools 69482, 67144, and 66106 each showcase the brand's commitment to delivering high-performance tools at an affordable price. With advanced features, robust technologies, and user-friendly designs, these tools are ideal choices for anyone looking to enhance their tool collection, whether for professional use or home improvement projects.
Top Page Image Contents