SECTION 3: SET UP
Unpacking
Your electric hoist was carefully packaged for safe shipping. If you discover any dam- age after you have signed for delivery, immediately call Customer Service at (570)
Save the containers and all packing materi- als for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condition of the shipment, you should inventory the contents.
Inventory
Model H0778/H0779 Inventory (Figure 2) | ||
A.. | Electric Hoist | 1 |
B.. | Mounting Brackets | 2 |
C.. | Pulley Lift Hook | 1 |
D.Flat Washers
. | 8MM (H0778) | 4 |
. | 10MM (H0779) | 4 |
E.External Tooth Washers
. | 8MM (H0778) | 4 |
. | 10MM (H0779) | 4 |
F.Hex Bolts
. | 4 | |
. | 4 |
A
B
D
C
E
F
Figure 2. Model H0778/H0779 inventory
(Model H0778 shown).
Site Consideration
Weight Capacity
Refer to the weight capacity listed in Machine Data on Page 2. When choosing a mounting site, verify that the lifting struc- ture can withstand at least the maximum loading capacity as well as any possible overloading that may occur.
Working Clearances
Consider existing and anticipated needs, dimensions of your lifting platform, size of material to be lifted, and whether you need the hoist to be mobile or in a stationary location when establishing an installation site for your electric hoist.
Power Outlets
The Model H0778/H0779 electric hoist is equipped with a control switch on a 5 ft. long cord. When establishing a site for your hoist, make sure the control switch can be reached and that outlets are locat- ed near the hoist so power or extension cords are clear of
Model H0778/H0779 Electric Hoist |