LiteRider PTC_Owner’s Manual | Rev A_121911 |
VI. COMFORT SETTINGS
Footrest Angle Adjustment
1.Fold the footrest upward for easy access to the angle adjustment bolt. See figure 11.
2.Turn the jam nut
3.Use an 8mm Allen wrench to turn the adjustment bolt. Turn the adjustment bolt
4.When the desired footrest angle is reached,
Jam Nut
Angle Adjustment Bolt(17mm)
(8mm Allen)
Figure 11
Footrest Height Adjustment
1.Remove front body shroud by lifting it up and off of the power chair base.
2.Use a 10mm socket and 4mm Allen wrench to remove the bolts indicated in figure 12.
3.Slide the footrest to the desired height.
4.Align the bolt holes in the footrest and the footrest bracket.
5.Install and tighten the bolts.
Lock Nuts (10mm)
Height Adjust Bolts
(4mm Allen)
Figure 12
19