Graham Field FR566G operating instructions Heat and Massage Unit Setup Instructions

Page 16

Heat and Massage Unit Setup Instructions

1.Place the back cushion over the vertical bayonet lugs of the recliner mechanism. Secure back on each side with the threaded screw knobs enclosed with the Recliner Operating Instructions, as shown at right.

2.Raise the back skirt on the lower rear of the back cushion and use masking or packaging tape to temporarily secure it up and out of the way. This will permit uninterrupted access to the back compartment while making the final cable connections.

3.Use a 1/4" hex wrench to remove the two hex head screws that secure the junction box cover (see picture of junction box at top of page). Remove the junction box cover to expose the control module.

4.Insert the switch box cable connector (labeled SWITCH) and the two connectors (labeled HEAT and HEAT A) and the cable leading from the rear of the seat cushion into the plastic bushing in the bottom of the back cushion and pull them through the bushing into the back compartment, as shown at right.

recliner mechanism

knob

Knob

Secure Back Cushion to

 

Recliner Mechanism

back cushion bushing

cables

Insert cables through back cushion bushing

5.Insert the seat cushion cable connector (labeled HEAT A) into the connector labeled HEAT A already in the back compartment until its locking tabs snap into place.

6.Insert the connector labeled HEAT into the connector also labeled HEAT in the left side of the control module (see picture of control module at top of page) until its locking tab snaps into place.

7.Insert the connector labeled SWITCH into the connector also labeled SWITCH in the right side of the control module (see picture of control module at top of page) until its locking tab snaps into place.

8.See picture at right. Remove the lock nut from the screw that secures the cushioned cable clamp. Remove the clamp and place it around the switch box cable. Slide the clamp over the cable until the holes in the clamp tabs are in line with the screw. Then pinch them closed. Install the clamp tabs on the screw, then reinstall the lock nut on the screw. Hold the lock nut with a 3/8" hex wrench and tighten the screw with a Phillips screwdriver.

switch box cable

clamp

screw

lock nut

clamp tabs

Secure Switch Box

cable clamp

9.Place the cable labeled HEAT A inside the junction box. Replace the junction box cover; replace the two hex head screws that secure the junction box cover. Use a 1/4" hex wrench to secure the screws.

10.Remove the tape holding the back flap. Lower the flap and seal the compartment.

11.The Heat and Massage Unit is now ready for operation. Instructions for use follow.

s. NOTICE:.Before.rolling.the.recliner,.ensure.the.power.cord.is.unplugged.from.the.AC. outlet..

FR566DG-INS-LAB-RevC13: Deluxe Clinical Care Recliner Assembly and Operating Instructions

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents FR566DG-INS-LAB-RevC13 Contents Introduction Important Safety PRECAUTIONS-PLEASE Read Before USEIntended USE Distributed Assembly Features, FR566G and FR566GHUnpacking Product DescriptionFeatures, FR566DG and FR566DGH Upholstered Back Assembly, All Models Operation Tente CASTERS, ALL ModelsTo Raise Table Side Table OPERATION, ALL ModelsTo Lower Table FR566G and FR566GH Side Panel OperationFR566DG and FR566DGH First Position Recliner OPERATION, ALL ModelsSecond Position Third Position Trendelenburg Position Also Known as Shock PositionTo Operate the Drop Arm Feature Drop ARM FUNCTION, FR566DG and FR566DGH onlyInstallation and Operating Guide Lumex Clinical Care Recliners with Heat and Massage FeatureDescription Connection Main ComponentsHeat and Massage Unit Setup Instructions Heat and Massage Unit Operation Instructions Heat and Massage Unit Troubleshooting Guide POST-INSPECTIONUpholstery Maintenance and Stain Removal Care and MaintenanceEvery Three Months Page Page Technical Specifications Limited Warranty
Related manuals
Manual 30 pages 28.73 Kb

FR566G specifications

The Graham Field FR566G is a remarkable mobility scooter designed specifically to enhance accessibility and convenience for individuals with mobility challenges. This advanced scooter is part of Graham Field's prestigious range of mobility solutions, combining cutting-edge technology with user-friendly features.

One of the key characteristics of the FR566G is its exceptional maneuverability. With a compact design and a turning radius that allows for easy navigation in tight spaces, users can confidently maneuver both indoors and outdoors. This scooter is equipped with a robust chassis and a suspension system that provides smooth rides over various terrains, ensuring stability and comfort.

The FR566G features a powerful motor that allows it to reach speeds of up to 5 mph, making it suitable for both leisurely rides and necessary errands. With a weight capacity of 300 pounds, it can accommodate a wide range of users, offering strength along with versatility. The scooter's long-lasting battery provides an impressive range, allowing users to travel longer distances without the need for frequent recharging.

An important aspect of the FR566G is its ergonomic design. The seat is padded for comfort and adjustable to suit individual preferences. Additionally, the scooter comes with armrests that can be flipped up, making it easier for users to enter and exit the device. With easy-to-use controls, individuals can operate the scooter efficiently, even if they have limited strength or dexterity in their hands.

Safety is a fundamental consideration in the design of the FR566G. The scooter features bright LED lights for visibility during low-light conditions and a horn to alert pedestrians. Anti-tip wheels enhance stability, while the regenerative braking system ensures that users can stop quickly without compromising safety.

Another noteworthy feature is the scooter's portability. The FR566G can be disassembled easily into lightweight components, making it transportable in vehicles. This feature is particularly beneficial for users who enjoy traveling or require a mobility solution for excursions.

In summary, the Graham Field FR566G scooter embodies a harmonious blend of comfort, safety, and technological innovation. It equips users with the independence they need, promoting an active lifestyle while addressing mobility limitations. This scooter stands as a testament to Graham Field's commitment to enhancing the quality of life for individuals with mobility challenges.
Top Page Image Contents