| Specifications | |
iteM | descriptiOn | |
|
| |
Power Requirement | 12 VDC, 45 amps | |
|
| |
Power Cable | #45 AWG copper cable with plug; 21 feet long | |
Control Cable | 1/4 inch diameter; 4 feet long; Squeeze trigger | |
|
| |
Lift Capacity | 500 lbs. (maximum) | |
Deck Size | 25 x 28 inches | |
Overall Dimensions | 15 (H) x 63 (L) inches | |
|
| |
Features | - Automatic shutoff | |
- | ||
| ||
Weight | 140 lbs. |
Note: Customer may need to supply one 50 amp circuit breaker and two 6 AWG battery terminals with 5/16” stud opening.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Keep work area clean. Cluttered areas invite injuries.
2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.
3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
5.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended.
6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically
7.Use eye protection. Always wear ANSI approved impact safety goggles.
SKU 47591 | Page 2 | REV 08/02 |