2.3Weight Limitation and Model Numbers
Refer to the chart for the weight limitation and stock model numbers. Configured model numbers are:
MA = Matrx Vi, KA = Matrx Kidabra Vi Grey = size not available
|
|
|
|
|
|
|
|
|
|
WIDTH |
|
|
| DEPTH |
|
|
| WEIGHT | |
|
|
|
|
|
|
|
|
| LIMIT* |
|
| 12 IN | 14 IN | 15 IN | 16 IN | 17 IN | 18 IN | 20 IN | |
|
| (30 CM) | (36 CM) | (38 CM) | (41 CM) | (43 CM) | (46 CM) | (51 CM) |
|
12 in (30 cm) |
|
|
|
|
| 150 lbs (68 | |||
14 in (36 cm) |
|
|
|
|
| kg) | |||
|
|
|
|
|
|
| 300 lbs | ||
16 in (41 cm) |
|
|
|
| (136 kg) | ||||
18 in (46 cm) |
|
|
|
|
| ||||
20 in (51 cm) |
|
|
|
|
| ||||
22 in (56 cm) |
|
|
|
|
|
|
3 Usage
3.1Installing the Invacare Matrx Vi or Kidabra-Vi
1.Position the cushion so the material
| identification tags (not shown) face the rear. | Rear |
2. | Align the hook and loop strips (not shown) on |
|
| the bottom of the cushion with those on the |
|
| wheelchair seat. |
|
3. | Position the cushion onto the wheelchair as far |
|
| back as possible. |
|
4. | Press down to ensure the hook and loop strips |
|
| are firmly engaged. | Front |
|
|
4 Care and Maintenance
4.1Cleaning
Outer Cover
The cover can be wiped clean with a damp towel.
The cover can be removed for laundering. Carefully remove the cover by unzipping the zipper found on the rear of the cushion. The zipper should be closed prior to laundering.
Machine wash using the delicate cycle and hang dry or tumble dry on low.
Inner Cover
The inner cover can be wiped clean with a damp cloth. The inner cover should not be removed from the foam.
4.2Inspection
WARNING
DO NOT continue to use this product if problems are discovered. Corrective maintenance can be performed at or arranged through your equipment supplier.
Visually inspect parts including upholstery materials, foams (if accessible), and plastics, for deformation, corrosion, breakage, wear or compression.
Part No 1171788 | 3 | Invacare® Matrx® Vi and |