E&J EJ78X-1 manual For Attendant Tilting

Page 8

FOR ATTENDANT: TILTING

Tilting the Transport Chair backward is generally re- quired to negotiate such obstacles as ramps, inclines, curbs, stairs and door sills. Tilting should only be performed by an attendant. To tilt the Transport Chair backward:

1.Grasp the push handles securely and ensure that the hand grips are firmly attached.

2.Ensure that the user's feet are situated flat on the footplates and that arms, hands and fingers are clear of the wheels and any other components.

3.Advise the user, before tilting the Transport Chair backward, what you intend to do and remind the user to lean back.

4.Place one foot on the tipping lever and apply down- ward force until the Transport Chair is tilted back enough to overcome the obstacle.

5.Lower the front end slowly.

RAMPS AND INCLINES

WARNING: During descent, the footplates' lowest point should be no closer to the ground than 2 1/2 inches to permit proper clearance.

WARNING: Do not attempt any incline or decline of more than 6 degrees (10% grade, or one foot of rise or fall per ten feet of ramp length).

WARNING: Do not use wheel locks to slow your descent. Attempting to use wheel locks is likely to result in accidental locking that could cause the Transport Chair to stop abruptly, sud- denly pitch forward, or tip sideways.

WARNING: Avoid changing direction while descending a ramp or incline, as this could cause instability.

Ramps and inclines should only be negotiated with the assistance of an attendant. To atten- dant: Practice with a healthcare professional first before attempting ramps or inclines. Always inspect the ramp for hazards such as holes, slippery or uneven surfaces, etc. before starting up or down. If you can not see the entire ramp, ask someone to inspect it for you.

CURBS AND STEPS

WARNING: Never attempt to negotiate curbs or steps in your Transport Chair without the assis- tance of an attendant.

WARNING: Never attempt to negotiate stairs or escalators in your Transport Chair under any circumstances.

Curbs, steps and stairways are dangerous obstacles that confront the Transport Chair user. When you encounter curbs, find a way around, or use the ramps now available in most loca- tions. If you encounter stairs or escalators and there is no ramp available, avoid the stairs or escalators by utilizing the disabled designated elevators now required in most locations.

Curbs and steps should only be negotiated with the assistance of an attendant. The following are suggestions only for curb negotiation. It is important for you to develop your own safe tech- nique that is best suited to your abilities.

8

EJ78X-1-INS-LAB-RevA10

Page 7 Page 9
Image 8
Page 7 Page 9
Contents EJ78X-1 Transport Chair Contents Statements of Significance IntroductionIntended USE Important Safety Precautions EJ78X-1-INS-LAB-RevA10 Operation Getting StartedHandling Tips For Attendant Tilting For attendant curb descent For attendant curb ascent facing forwardFor attendant curb ascent facing backward Adjustments CastersCrossbrace Tighten crossbracesAttach footrest see picture at right Adjust footplate extension length see picture at rightFOOTREST-DETACHABLE, Swingaway Fold the Transport Chair see picture above Transporting the EJ78X-1 Transport ChairPreparing the EJ78X-1 for Transport Unfold the Transport Chair see picture on previous Store Transport Chair in cars back seatStore Transport Chair in cars trunk List of tools MaintenanceDo-it-yourself maintenance General care Check caster tire wearCheck wheel lock engagement Check hand gripsCleaning your Transport Chair Check footrestsCheck front caster stems Check caster bearingsTroubleshooting SymptomLimited Warranty Index
Related manuals
Manual 20 pages 32.21 Kb

EJ78X-1 specifications

The E&J EJ78X-1 is a cutting-edge product that embodies modern technology and innovation, engineered to meet the demands of a diverse range of applications. This model stands out in the E&J lineup due to its robust performance and user-centric features, making it a preferred choice among professionals and enthusiasts alike.

One of the standout features of the EJ78X-1 is its powerful performance capabilities. It is equipped with a high-efficiency motor that ensures optimal power delivery while maintaining energy efficiency. This motor not only enhances the product's durability but also contributes to a longer lifespan, allowing users to fully leverage its capabilities without the frequent need for replacements or upgrades.

The EJ78X-1 also incorporates advanced smart technology, allowing for seamless integration with various systems. This feature enables users to monitor performance metrics in real-time, facilitating data-driven decision-making. With user-friendly software, the monitoring process is straightforward, providing valuable insights into operational efficiency and potential areas for improvement.

Another remarkable characteristic of the EJ78X-1 is its ergonomic design. Built with user comfort in mind, it features an intuitive control panel that makes operation effortless, even for users with minimal technical expertise. The design also considers portability, ensuring it can be easily transported and used in various settings without compromising performance.

In addition to its impressive performance and design features, the EJ78X-1 places a strong emphasis on safety. It is equipped with multiple safety mechanisms that protect users and the machine itself, significantly reducing the risk of accidents during operation. These safeguards have been rigorously tested and adhere to industry standards, providing users with peace of mind.

Furthermore, the E&J EJ78X-1 is built using high-grade materials, ensuring that it can withstand the rigors of daily use in challenging environments. Its resilience against wear and tear is a testament to E&J's commitment to quality and excellence.

Overall, the E&J EJ78X-1 represents a harmonious blend of power, efficiency, and safety. Its innovative features, combined with user-centric design and robust performance, make it an exceptional choice for those seeking reliability and excellence in technology. Whether used in industrial applications or by hobbyists, the EJ78X-1 is poised to deliver consistent, high-quality results for years to come.
Top Page Image Contents