ULTRA-DI DI20
Professional Active 2-Channel DI-Box/Splitter
sConverts 2 separate unbalanced ¼" TRS line inputs into 2 balanced XLR outputs
s
sAdditional split mode (channel 1 assigns the signal to both XLR outputs)
sPhantom or 9 V battery powered
sSwitchable input attenuation allows connection to outputs with up to 3,000 Watts
sInput 2 usable as channel 1 link output (additional to XLR output)
sGround lift switch eliminates typical ground loop problems
s
s
sManufactured under ISO9000 certified management system
SPECIFICATIONS
Frequency response | 10 Hz to 70 kHz |
Noise | 100 dBu |
Distortion | < 0.014% (1 kHz, 0 dBu in) |
Input resistance | > 250 kΩ |
Connection impedance | > 600 Ω |
Input | 1/4" mono jack |
Output | XLR balanced |
Max. input level | +12/+32/+52 dBu |
Phantom power | 18 V DC to 48 V DC |
Battery power | 9 V 6LR91 |
Dimensions | 6" (150 mm) x 5" (130 mm) x 2 3/8" (60 mm) |
Weight | approx. 650 g |
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
The information contained in this publication is subject to change without notice. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER and
© 2003 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH,
Tel. +49 (0) 21 54 / 92
2