E&J 3K01-INS-LAB-RevA12 manual Loosen latch to free

Page 19

Adjust legrest footplate extension length See picture at right.

1. Loosen latch to free

footplate extension

inside legrest hanger.

2. Press down on the

locking buttons and

adjust the footplate

to the desired length.

Ensure that the

locking buttons are

completely extended

and securely fastened

in the adjustment

holes.

3. Fasten latch to secure

footplate extension

inside legrest

locking button

adjustment holes

latch

footplate

hanger

hanger.

4. Repeat steps 1-3 for

the other footplate

extension.

elevating legrest

footplate extension,

adjust length

5.Ensure that both footplate extensions are securely fastened and that minimum ground clearance is 2 1/2 inches.

WARNING: Ensure that footplates are securely fastened before occupying or operating wheelchair.

3K01-INS-LAB-RevA12 • Advantage Recliner User Manual

19

Image 19

Contents Recliner Contents ReAd tHIS Manual BefoRe opeRAtING yoUR wHeeLcHAIR INtRodUctIoNPage IMpoRtANt SAfety pRecAUtIoNS Page Page GettING StARted Lowering Reclining Back ReMovABLe HeAdReSt Installation of Removable HeadrestOpeRAtIoN of RecLINeR LoweRING ANd Raising RecLINING BAcKBALANce HANdLING tIpSTRANSfeR ActIvItIeS Forward or sideward ReAcHING / BeNdINGBackward Ascent RAMpS ANd INcLINeSDescent CURBS ANd StepS AdjUStMeNtS ReAR wHeeLS & cASteRS Remove arm Install armELevAtING LeGReSt-detAcHABLe, SwINGAwAy FRoNt RiggingAdjust elevating legrest panel position Adjust legrest elevationLoosen latch to free Tighten crossbraces CRoSSBRAceSWHeeL LocKS Adjust wheel locksDo-it-yourself maintenance MAINteNANceGeneral care List of toolsCheck anti-tippers Check tire wearCheck handrims Check wheel lock engagementCheck backposts / push handles Check rear wheel adjustmentCheck upholstery Check armsCheck wheel bearings Cleaning your Advantage ReclinerCheck elevating legrests Check castersSymptom TRoUBLeSHootINGAdvantage Recliner Manual Wheelchair LIMIted wARRANtyPage Page Index