4 ADJUSTMENTS
The
The person performing adjustments on the Transport Chair has the responsibility of making certain that the user and attendant can safely operate the Transport Chair with the adjustments selected. This person must evaluate the user's ability, weight, physical condition, the environment in which the Transport Chair will be used, and the terrain over which the Transport Chair will travel.
All adjustments and their page locations are referenced in the index at the end of this manual. Specific tools needed to perform each adjustment are identified in adjustment directions. Most of the following adjustments can be performed with the wrench included with your
REAR WHEEL & CASTER
We recommend that you do not replace or adjust rear wheel or caster components yourself, since special tools and training are required. Please contact your
CROSSBRACE
Tighten crossbraces
Tools required: included wrench, M6 hex key
Check the crossbraces to ensure that the bolts and nuts that fasten the crossbraces in the center of the Transport Chair are secure (crossbraces should be loose enough to fold easily, yet snug enough to take up excess play). Use the included wrench and an M6 hex key to tighten the crossbraces.
| 13 |